MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS
12Pages

{{requestButtons}}

Catalog excerpts

MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 1

MECHANICAL MACHINING STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS Machining of aluminium, copper, cast iron and steels Machining of plastics and composite materials Deep drilling Spark machining Vibratory finishing

Open the catalog to page 1
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 2

The machines of the MINIPURE range eliminate all micro-cuttings, powder, solid particles, free-floating oils or oils in emulsion used for lubricating the machine (soluble oils) continuously. Also suitable for spark machining, water jet cutting, etc. Highly compact, mobile system which is easy to adapt to any type of machine. ADVANTAGES The continuous elimination of all pollutants in the cutting and process fluid ensures the following: Controlling of cutting conditions Improving the quality of the parts produced Limiting the wear or breakage of cutting tools (tools with centre cooling)...

Open the catalog to page 2
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 3

VERSATILITY Solutions for technical filter media for your applications OIL-TECH Canister MAG-TECH Magnetic filtration The cutting fluid flows into the container which is filled with a charge of microfibres in a canvas bag which is easy to remove in order to replace the charge of microfibres. The microfibres have great holding for hydrocarbon grease. They are hydrophobic and do not absorb neither water nor emulsified cutting fluid. On average, a charge of 11 litres microfibres (approximately 0.7 Kg) recovers 6 litres of oil. The liquid flow is channeled around 300 mm long stainless steel magnetic rods,...

Open the catalog to page 3
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 4

Cartridge FIL-TECH _ or Container OIL-TECH Castiner OIL-TECH Canister .OIL-TECH Canister • BAG-TECH mechanical seals Centrifugal pump with MP52D-A18 The first tank is installed upstream of the pump. This tank is in underpressure and is used to collect large cuttings in a filter bag. It is washable and reusable. The second tank is fitted with a canister filled with microfibres designed to remove oil from the cutting or process fluid.

Open the catalog to page 4
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 5

Cartridge FIL-TECH Canister -BAG-TECH Cartridge FIL-TECH Centrifugal pump with mechanical seals Inlet : Grooved nozzle Volumetric pump MINIPURE MP52DV The first tank is installed upstream of the pump. This tank is in underpressure and is used to collect large cutting in a filter bag. It is washable and reusable. The second tank is fitted with a cartridge for filtering the oil. The first tank is installed upstream of the pump. This tank is in underpressure and is used to collect large cuttings in a filter bag. It is washable and reusable. The second tank is fitted with a cartridge for...

Open the catalog to page 5
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 6

90° grooved nozzle inlet Ø 32 mm SURFACE SKIMMER FLOATING SKIMMER Very easy to install in the oil tank using the magnetic bracket. Specially designed for collecting floating oil by siphoning. Fitted with a removable pump protection strainer for stopping large pieces of swarf. This strainer is removed when using a BAG-TECH. Collects the oil floating on the surface. Can handle large level variations, up to 240 mm, thanks to its patented articulated design. DRAIN VALVE Used to drain the tank(s) quickly. PROTECTION KIT AGAINST DRY RUNNING Protects the pump against usage malfunctions (major air...

Open the catalog to page 6
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 7

90° grooved nozzle inlet Ø 32 mm

Open the catalog to page 7
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 8

The liquide charged with oil is pumped in the coalescer’s body, consisting of two chambers. By gravity separation or coalescence, the oils migrate towards the second chamber and are evacuated. Pressure Coalescer Applications: ► Detergent degreasing bath Advantages: ► Great treatment capacity, up to 5 litres of oil extracted per hour ► High flow rate self-repriming, up to 2 000 L/h ^ Manual extraction of the oil by operating a valve ^ Temperature up to 80°C (PVDF model) ^ Capacity of 15/20 litres of oil ^ In option: automatic and programmable evacuation of the oil for high volumes...

Open the catalog to page 8
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 9

NANOREACTOR Patented High UV radiation system coupled with a flow divider Cutting oil / turbid liquids disinfection Reduction of the needs / dependence on biocides Fits on all the existing MINIPURE range Working principle: The NANOREACTOR allows a reduction of bacterial contamination. Flow divider The NANOREACTOR eliminates bacterias in turbid liquids such as cutting oils or coolant fluids allowing to reduce the dependence on biocides. It includes a patented high radiation UV system with flow divider and a catalytic element. This design allows the exposure of the whole liquid to the UV...

Open the catalog to page 9
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 10

CENTRIPURE Lifting tank with integrated filtration CENTRIPURE • Equipped with a MINIPURE filter with an L-TECH cartridge and centrigugal pump. In option, BAG-TECH pre-filter for swarfs and OIL-TECH degreasing. Fixed or wheeled assembly. In option, one or two sprinkling pumps. High pressure central sprinkling Tool sprinkling or evacuation of swarf Filter suction Skimmer collecting tank Filter outlet

Open the catalog to page 10
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 11

EASYPURE Applications Treatment of swarf straining liquid Recycling of washing baths Treatment of vibratory finishing systems effluents Compact effluent treatment system Autonomous system ready for use: Semi automatic / Automatic Simple use / Compact for space saving Low operating cost Finishing modules: FIL-TECH Cartridge filtration OIL-TECH Microfibre for oil extraction CARBO- TECH Carbon or resin EASYPURE is entirely customizable and can be equipped with different modules: Easy - Bag Sludge collection Sludge collection pH regulations Injection of miscellaneous chemicals (coagulating,...

Open the catalog to page 11
MINIPURE ® STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS - 12

Since its creation in 1958, SIEBEC has been designing and manufacturing in France a wide range of pumps and filters for industry as well as mini-stations for treating industrial effluents. SIEBEC GmbH Im Grund 11 Postfach 57 75042 WALZBACHTAL Tel. : +49 (0)7203/91300 Fax : +49 (0)7203/913050 info@siebecgmbh.de ESPAÑA PRODUCTOS GALVANIZADOS SIEBEC S.L. The SIEBEC Group is present in more than 40 countries through its subsidiaries and its distributor network. Head office Subsidiaries Distributors

Open the catalog to page 12

All Siebec catalogs and technical brochures

  1. ATMOS

    4 Pages

  2. QUALIPOCHE M

    2 Pages

  3. QUALIPOCHE F

    2 Pages

  4. PBNA

    4 Pages

  5. J50

    2 Pages

  6. J30

    2 Pages

  7. J 25

    2 Pages

  8. J15i

    3 Pages

  9. MC15

    2 Pages

  10. MC4 MC10

    2 Pages

  11. Filtres MC10

    14 Pages

  12. A31P - A33P

    6 Pages

  13. vertical pompe

    22 Pages

  14. Pumps A15-A30

    10 Pages

Archived catalogs

  1. T Pumps

    21 Pages

  2. MC Filters

    12 Pages

  3. L filters

    25 Pages