- Catalogs
- Sidrabe Inc.
- PVD Lithium Thin Foil
PVD Lithium Thin Foil
PVD Lithium Thin Foil
Customized vacuum coating systems are designed for PVD (Physical Vapor Deposition) of lithium thin foils, specifically for lithium web coaters and coating processing. These systems are used for custom samples and batch production, focusing on coating equipment engineering.
- Substrates: Lithium coatings ranging from 1 to 20 microns can be deposited in a single pass onto thin metallic foils or metallized polymer films.
- Purity: High vacuum deposition ensures lithium is in a pure state with minimal oxide layers, enhancing battery performance.
- Surface Activity: The deposition conditions provide high lithium surface activity, which is not achievable through traditional rolling methods.
- Cost Efficiency: PVD processing reduces metal usage, lowering product costs compared to conventional rolling.
- Optimal Thickness: Lithium coating thickness can be tailored to battery chemistry, avoiding excess lithium.
- SIDRABE's laboratory can deposit up to 20 microns of lithium on metallic foils and up to 10 microns on PP or PET films, with a necessary metallic sub-layer for PET films to prevent interaction with polymer moisture.
- Research and development areas are available for lithium coating investigation and sample manufacturing under contract.
- Web coaters equipped with processor drums allow effective cooling and thick layer deposition in a single pass.
- Coated materials are packaged in sealed metal-polymeric bags filled with Argon for protection.
SIDRABE, 17 Krustpils Str., Riga, LV1073, LATVIA
Tel: +371 67249-806
Fax: +371 67139-506
Email: [email protected]
Website: www.sidrabe.com
Catalog excerpts
Li Web Coaters and Coating Processin Custom Samples and Batch Production Coating Equipment Engineering
Open the catalog to page 1
Lithium PVD coating advantages and performance capabilities • Different substrates 1…20 microns thick Lithium coatings can be deposited in one pass onto thin metallic foils or thin metallized polymer films Battery separator material “Celgard” with 2.5 microns of Lithium (x2000). • High Purity Li Since Lithium is deposited in high vacuum, it comes out in a “pure” state: vacuum deposited Lithium has minimal oxide layers. Lithium batteries benefit by high levels of purity. 17 microns thick Copper foil with 19 microns of Lithium (x 500). 100 Vacuum depositted Li thin film Commercially available rolled...
Open the catalog to page 2
Capabilities of PVD Lithium coating equipment in Sidrabe laboratory • SIDRABE has research and development areas for Li coating investigation and samples manufacturing under contracts with potential customers. We keep SIDRABE made two Laboratory Roll-to-Roll Lithium coaters associated with Dry Room and web slit machine inside it. Coated material is transferred into the Glove box for packaging into sealed meal-polymeric bags t filled with Argon. • Both web coaters are equipped with the processor drums, where coating deposition heat is transferred through the gas gap (so-called “venting drums”,...
Open the catalog to page 3
Contacts: 17 Krustpils Str. Riga, LV1073, LATVIA Tel: +371 67249-806 Fax: +371 67139-506 E-mail: [email protected] http://www.sidrabe.com
Open the catalog to page 4All Sidrabe Inc. catalogs and technical brochures
SAF L-EM7 Pages
R&D CLUSTER TOOL SAF23 Pages
R and D4 Pages
Equipment for PV materials4 Pages
Sidrabe Catalogue20 Pages
- Measuring machine
- Drying system
- Solids separator
- Centrifugal classifier
- Liquids separator
- Particle separator
- Automatic separator
- Batch drying system
- Coating machine
- Vacuum dewatering system
- Laboratory evaporator
- Cyclone classifier
- Vacuum evaporator
- Thermal evaporator
- Powder coating machine
- Real-time measurement system
- Continuous measurement system
- Metalized film deposition machine
- Automatic coating machine
- Coating application system