EvoFill Can
2Pages

EVOFILL CAN Top quality products at an advanced performance level EvoFILL Can, is the most technologically advanced filler for cans, which combines the best hygienic conditions with a greater flexibility, sustainability and performance level. Without compromising the performance of the line, running at over 130,000 cans per hour, beer can be filled up to 18°C and CSD over 20°C. It fills CSD at ambient temperature and still drinks in hot-fill via a single piece of equipment. Addressing top hygienic requirements, EvoFILL Can’s “no base” design, which as a whole is very accessible, ensures an overall easy cleaning and no residual of product in the filling environment. The solution’s improved CO2 pre-flushing system results in utmost food safety, as there is no residue and a cleaner zone. Consuming less CO2 in total, this feature improves beverage quality and leads to greater performance. For beer producers, this means lower O2 pick-up, down to 30 ppb, nonetheless saving resources. INCREASED HYGIENIC CONDITION This patented technology ensures: ■ Allow a wider range of products even more sensitive (flash pasteurized beer, filtered beer, non alcoholic beer, low carbonated soft drinks,…) ■ New "no base" basement ensures easy cleanability and no residual of products in the filling environment ■ New drive system - servomotors - means no mechanical transmission between the filler and the seamer, no need of lubrication, no moving parts in the filling area ■ Integrated pneumatic box on each filling valve: no pneumatic pipes in the filling environment ■ External beverage tank and chamber: better and effective cleanability of all parts in contact with the beverage. Full beverage chamber means that all surfaces are perfectly reachable and cleaned (no wet and dry separation) ■ Reduced top surfaces of handling parts, all parts fully cleanable ■ No water required for rollers lubrication means: ■ No risk of water dripping during filling ■ No water residual inside the filling environment ■ Dissolved oxygen pick-up 30 ppb with 600 gr/hl of CO2 consumption (beer, 330 ml can) ■ Loss of carbonation ≤0,2 vols ■ Filling temperature from 2° to over 20°C ■ Single or double can infeed for very high speed ensures improved can quality - less stress - less damages (double infeed) SUPER ERGONOMIC DESIGN ■ New "no base" basement has a super accessible design allowing the operator easy changeover and maintenance ■ New drive system ensures better accessibility (no mechanical transmission) ■ New handling parts design is sectors based starwheels and guides, reducing weight and dimensions, so that replacement operations are smooth and easy

New “no base” design ensures easy cleaning and is very accessible. For maximun uptime, the integrated pneumatic box – an industry first – allows for easier maintenance and a very clean filling environment OUTSTANDING PERFORMANCE ■ Efficiency 98,5% ■ Water and chemicals saving for cleaning ■ Reduced CO2 consumption – related to oxygen pick-up (beer) ■ Planned downtime saving (cleaning, maintenance, changeover) ■ Energy saving (higher filling temperature, servomotors) Filling accuracy 1 ml S.D. (≤500 ml can) Filler range (# filling valves): from 54 to 182 Outputs: from 40,000 cph up to...