Low Emission Power Solutions for Your Business

Genset & PV Combined with Battery Seamless integration of genset, battery and PV for optimized power and cost efficiency SCU's solution combines gensets, PV, and battery storage for cost-effective, sustainable energy. Our solutions reduce fuel use, cut emissions, and boost reliability, delivering efficient, future-ready power systems tailored to your needs Cost Savings • Battery integration reduces genset fuel consumption by up to 50% • Lower operational costs through peak shaving and load levelling • Genset maintenance cost reduced by 50% Environmental Benefits • Up to 30% reduction in CO2 emissions...

Product Fleet Scenario : Site using Genset during day & 4kW average in the evening 60kVA Genset 8l/h fuel consumption, 50% load for 60 hrs (daytime) 4l/h for 108 hours (night) GRES Series Output Power: 50kW~200kW BATT Capacity: 75kWh~300kWh BATT Cycle: 4000 Cycles Dimension: 1680*1502*1700 Weekly Stats Genset only Fuel Usage: 937 Litres 60kVA Genset + GRES 50kW Daytime: 8l/h fuel consumption, 50% load for 63 hrs (3hrs charging) Night: 0l/h for 102 hours Weekly Fuel Saving BRES Series Output Power: 100kW BATT Capacity: 215kWh BATT Cycle: 6000 Cycles Dimension: 1600*1330-*2250 Container Series...

Positive Effects of Adding Batteries The all-new SCU GRES HYBRID ENERGY SYSTEMS represent a breakthrough in hybrid power solutions. This advanced mobile platform integrates engine generators with state-of-the-art battery technology and intelligent energy management for high-demand applications. POWER RELIABILITY: High Life Cycle BATT Noise Reduction The SCU GRES Hybrid Energy System incorporates rapid-charging, long-lifespan battery technology as the main power source, with the generator providing recharge support during high load demands or extended runtime requirements. Fully automated, the...

PowerSync Distribution Cabinet

PowerSync BRES GRID IfrtfcGRID Multi Source & Load Grid, Genset, PV, Storage to Load combination Multiple energy inputs for maximum flexibility PowerSync Cabinet Controls power flow with metering & STS Seamless switching & load management Integrated Energy Management System BRES Battery bank with inverters & protection Multiple battery banks can be paralleled

GRES Block Diagram Multi Source & Load • • Grid, Genset, PV, Storage to Load combination Multiple energy inputs for maximum flexibility GRES-PowerSync Integrated • • • • Controls power flow with metering & STS Seamless switching & load management Battery bank with inverters & protection Integrated Energy Manageme

Working Mode LOAD GENSET MODE 2 | BESS Priority MODE 3 | Hybrid Power Boost When solar generation is high, PV gets prioritized in powering the load while simultaneously charging the BESS. The system dynamically adjusts energy flow, ensuring maximum solar utilization. The EMS (Energy Management System) optimizes BESS charging and discharging as needed. When PV generation is low or additional power is required, the BESS seamlessly takes over, ensuring uninterrupted power supply. The system intelligently discharges stored energy to maintain load stability. When PV is OFF & Load demand surges, both...