W4F en
17Pages

{{requestButtons}}

Catalog excerpts

W4F en - 1

Product family overview The high-flyers in intelligent automation PHOTOELECTRIC SENSORS

Open the catalog to page ١
W4F en - 2

PHOTOELECTRIC SENSORS Advantages A IN INTELLIGENT AUTOMATION LYERS B C D E Reliable alignment in seconds with BluePilot F With the intuitive "BluePilot" operating concept, sensors of the W4F product family can be aligned particularly conveniently and precisely. The blue LED display gives the user direct feedback for optimal alignment. The photoelectric sensors can be precisely adjusted in a very short time via a push-turn mechanism. In addition, BluePilot provides a visual indication if the detection quality should drop due to contamination or vibration, allowing faults to be corrected...

Open the catalog to page ٢
W4F en - 3

PHOTOELECTRIC SENSORS Outstanding detection results in almost any application Whether with particularly flat, highly reflective, perforated or transparent objects: The W4F offers a wide range of technologies to ensure reliable detection results in the most diverse applications. For example, with the coordinated optical concept of the V-optics, which reliably detects transparent objects such as glass panes or highly reflective objects such as displays. With highly reflective and at the same time very flat objects such as chocolate bars, cookies or assemblies, the photoelectric proximity...

Open the catalog to page ٣
W4F en - 4

PHOTOELECTRIC SENSORS Rugged design for demanding ambient conditions Sturdy as steel, light as plastic: The smart interior of the W4F photoelectric sensors is protected by an ultra-rugged housing made of VISTAL®. This is made of fiberglass-reinforced plastic and thus easily withstands extreme thermal, chemical or mechanical loads. In combination with its small dimensions, the sensor is optimally suited for use in automation applications of all kinds. Thanks to the ultra-rugged VISTAL® housing, the sensor operates safely and reliably even under harsh ambient conditions. Whether dirt, heat or...

Open the catalog to page ٤
W4F en - 5

PHOTOELECTRIC SENSORS dently as soon as process parameters such as temperature or degree of contamination deviate too much. Should a sensor still fail, the extensive diagnostic data enables rapid identification of the cause and elimination of the problem. At critical temperatures, the W4F can automatically initiate maintenance, thus preventing failures. The possibility of foresighted and dePositioning tasks can be performed via mand-oriented device and system mainte- the output of distance values. nance minimizes failure risks. The output of remission values of the objects to be detected...

Open the catalog to page ٥
W4F en - 6

PHOTOELECTRIC SENSORS Technical data overview Dimensions (W x H x D) Light source Visible red light / Infrared light (depending on type) Enclosure rating Housing material Plastic VISTAL® Product description With the W4F, high performance and smart automation are now also available in a miniature size. The miniature sensor is the perfect complement to the product range of a new generation of opto-electronic sensors such as the W16 and W26 and, thanks to the new ASIC technology from SICK, consistently delivers extremely reliable detection results. This allows for versatile use in a wide range...

Open the catalog to page ٦
W4F en - 7

PHOTOELECTRIC SENSORS Ordering information Other models and accessories • Sensor principle: Photoelectric proximity sensor • Detection principle: Background suppression • Switching output: push-pull: PNP/NPN Sensing range min. / max. Light source Connection type Setting Method For configuring the sensor parameters and Smart Task functions For setting the sensing range, for configuring the sensor parameters and Smart Task functions 2022-02-04 12:16:00 | Product family overview  Subject to change without notice Cable with M12 male connector, 4-pin, 185 mm Cable with M8 male connector, 4-pin,...

Open the catalog to page ٧
W4F en - 8

PHOTOELECTRIC SENSORS Light source Connection type Setting Method Cable with connector M8, 3pin, 110 mm For setting the sensing range Cable with connector M8, 3pin, 340 mm For setting the sensing range For setting the sensing range For setting the sensing range For setting the sensing range, for configuring the sensor parameters and Smart Task functions PHOTOELECTRIC SENSORS | SICK For setting the sensing range For setting the sensing range, for configuring the sensor parameters and Smart Task functions Product family overview | 2022-02-04 12:16:00 Subject to change without not

Open the catalog to page ٨
W4F en - 9

PHOTOELECTRIC SENSORS Sensing range min. / max. Light source Connection type Infrared light Setting Method Cable with M8 male connector, 4-pin, 110 mm Cable with connector M8, 3pin, 110 mm For setting the sensing range For setting the sensing range, for configuring the sensor parameters and Smart Task functions For setting the sensing range  Subject to change without notice 2022-02-04 12:16:00 | Product family overview For setting the sensing range For setting the sensing range, for configuring the sensor parameters and Smart Task functions

Open the catalog to page ٩
W4F en - 10

PHOTOELECTRIC SENSORS • Sensor principle: Photoelectric proximity sensor • Detection principle: Background suppression, MultiSwitch • Switching output: push-pull: PNP/NPN Sensing range min. / max. Light source Connection type Setting Method Cable with M8 male connector, 4-pin, 110 mm For setting the sensing range, for configuring the sensor parameters and Smart Task functions Cable, 4-wire, 2 m Male connector M8, 4-pin • Sensor principle: Photoelectric proximity sensor • Detection principle: Background suppression, DoubleLine • Switching output: push-pull: PNP/NPN Sensing range min. / max....

Open the catalog to page ١٠
W4F en - 11

PHOTOELECTRIC SENSORS • Sensor principle: Photoelectric proximity sensor • Detection principle: Background suppression, NarrowBeam • Switching output: push-pull: PNP/NPN Sensing range min. / max. Light source Connection type Setting Method Cable with M8 male connector, 4-pin, 110 mm For setting the sensing range, for configuring the sensor parameters and Smart Task functions Cable with connector M8, 3pin, 110 mm For setting the sensing range For setting the sensing range, for configuring the sensor parameters and Smart Task functions • Sensor principle: Photoelectric proximity sensor •...

Open the catalog to page ١١

All SICK catalogs and technical brochures

  1. SLG-2 en

    14 Pages

  2. IMS en

    12 Pages

  3. T-Easic FTS

    56 Pages

  4. T-Easic® FTS

    12 Pages

  5. outdoorScan3

    20 Pages

  6. SPEETEC 1D

    6 Pages

  7. SPEETEC

    2 Pages

  8. midiCam

    5 Pages

  9. W4-3 PTFE

    4 Pages

  10. SMART SENSORS

    48 Pages

  11. MultiPulse

    37 Pages

  12. EDS/EDM35

    12 Pages

  13. TR110 Lock

    20 Pages

  14. outdoorScan3

    20 Pages

  15. LFV 310/330

    48 Pages

  16. WT18X-3P930

    2 Pages

  17. QAL3 Master

    4 Pages

  18. SICK Essentials

    118 Pages

  19. Fluid Sensors

    174 Pages

  20. Encoders

    388 Pages

  21. Zone control

    5 Pages

Archived catalogs

  1. 3D cameras

    6 Pages

  2. FLOWSIC 600

    4 Pages