Catalogs >
SICK >
AHS/AHM36 SSI Inox

AHS/AHM36 SSI Inox
1 / 29Pages

Catalog excerpts

RESISTANT, SMART, COMPACT: ENCODERS FOR HARSH ENVIRONMENTS Absolute encoders

AHS/AHM36 SSI Inox ABSOLUTE ENCODERS Product description The AHS/AHM36 SSI Inox absolute encoders set standards in resistance to environmental influences and SSI communication. due to the stainless-steel design and enclosure rating IP69K, the encoders are suitable for use in very harsh ambient conditions. With various mounting hole patterns and adapter flanges, the AHS/AHM36 SSI Inox absolute encoders fit into nearly every application. In addition to single-/mul-At a glance • compact 36 mm absolute encoder with maximum 26 bits (AHM36) or 14 bits (AHS36) • Housing, flange, shaft made of...

Open the catalog to page 2

ABSOLUTE ENCODERS AHS/AHM36 SSI Inox 1) Valid positional data can be read once this time has elapsed. 2) Minimum, LOW level (Clock +): 500 ns. 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 3

Singleturn Code type Code sequence parameter adjustable Clock frequency Gray (non-programmable encoder) Gray, binary (programmable encoder) CW/CCW configurable via cable (non-programmable encoder) CW/CCW configurable via programming tool or cable (programmable encoder) 2 MHz 2) CW/CCW (counting sequence when turning) Valid positional data can be read once this time has elapsed. 2) Minimum, LOW level (Clock +): 500 ns. 1) Electrical data Connection type Male connector, M12, 8-pin, universal Cable, 8-wire, universal, 0.5 m Cable, 8-wire, universal, 1.5 m Cable, 8-wire, universal, 3 m Cable,...

Open the catalog to page 4

Absolute encoders AHS/AHM36 SSI Inox Operating torque Permissible shaft movement, static (for hollow shafts only) Permissible shaft movement, dynamic (for hollow shafts only) Permissible shaft movement (for solid shafts only) Moment of inertia of the rotor Solid shaft, face mount flange Solid shaft, Servo flange Blind hollow shaft Bearing lifetime Solid shaft, face mount flange Solid shaft, Servo flange Blind hollow shaft Angular acceleration Operating speed For use with the adapters 2072298 and 2072295. For adapting to 1.25 m Ecoline wire draw mechanism; only available for multiturn...

Open the catalog to page 5

.Encoder version S Singleturn M Multiturn 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 6

ABSOLUTE ENCODERS AHS/AHM36 SSI Inox 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 7

8024135/2019-08-02 Subject to change without notice

Open the catalog to page 8

ABSOLUTE ENCODERS AHS/AHM36 SSI Inox 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 9

Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations Solid shaft, servo flange, male connector 2 (0.08) 0.08 B Dimensional drawings (Dimensions in mm (inch)) Solid shaft, face mount flange, connector outlet Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations

Open the catalog to page 10

Absolute encoders AHS/AHM36 SSI Inox Solid shaft, face mount flange, cable outlet 12 ) Ø .47 1 (0 6. ) Ø .24 0 Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations Solid shaft, servo flange, cable outlet 2 (0.08) 0.08 B (0 Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 11

AHS/AHM36 SSI Inox Absolute encoders Blind hollow shaft, male connector connection X Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations Blind hollow shaft, cable outlet Ø Non-tolerated dimensions according to DIN-ISO 2768-mk 1 Measuring point for operating temperature 2 Measuring point for vibrations

Open the catalog to page 12

V/R Forwards / Reverse: This input programs the counting direction for the encoder. When it is not connected, this input is set to HIGH. If the encoder shaft is rotated clockwise (to the right) as viewed when facing the shaft, it counts in ascending order. If it should count in ascending order when the shaft is rotated counterclockwise (to the left), then this connection must be permanently set to LOW level (GND). SET This input is for electronic zeroing. If the SET cable is set to US for more than 250 ms, the mechanical position corresponds to the O value, i. e., the predetermined SET value.

Open the catalog to page 13

AHS/AHM36 SSI Inox Absolute encoders Proposed fitting Solid shaft, face mount flange with flange adapter, centering collar D20 on D50 (BEF-FA-020-050-I, 2103985) 0.05 B 4 +0.1 (0.16) 3 (0.16) 50 ±0.7 (1.97) Order example for 6 mm shaft diameter: AHx36I-S3xx0xxxxx + BEF-FA-020-050-I (adapter is not pre-assembled) Solid shaft, face mount flange with flange adapter, centering collar D20 on D24 (BEF-FA-020-024-I, 2103982) Order example for 6 mm shaft diameter: AHx36I-S3xx0xxxxx + BEF-FA-020-024-I (adapter is not pre-assembled)

Open the catalog to page 14

Solid shaft, face mount flange with flange adapter, centering collar D20 on D36, 2 mm high (BEF-FA-020-036-2-I, 2103984) 1 7. . 2 8 ) Order example for 6 mm shaft diameter: AHx36I-S3xx0xxxxx + BEF-FA-020-036-2-I (adapter is not pre-assembled) Solid shaft, face mount flange with flange adapter, centering collar D20 on D30 (BEF-FA-020-030-I, 2103983) 55 ±0.7 (2.17) Order example for 10 mm shaft diameter: AHx36I-SCxx0xxxxx + BEF-FA-020-030-I (adapter is not pre-assembled) 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 15

AHS/AHM36 SSI Inox Absolute encoders Solid shaft, face mount flange with flange adapter, centering collar D20 on D36 (BEF-FA-020-036-I, 2103986) 14 (0.55) 8 +0.1 53 ±0.7 (2.09) Order example for 10 mm shaft diameter: AHx36I-SCxx0xxxxx + BEF-FA-020-036-I (adapter is not pre-assembled)

Open the catalog to page 16

ABSOLUTE ENCODERS AHS/AHM36 SSI Inox dimensional drawings g page 24 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 17

8024135/2019-08-02 Subject to change without notice

Open the catalog to page 18

ABSOLUTE ENCODERS AHS/AHM36 SSI Inox Brief description Head A: female connector, M12, 8-pin, straight Head B: Flying leads cable: Pur, halogen-free, shielded, 4 x 2 x 0.25 mm2, 7 mm 8024135/2019-08-02 Subject to change without notice

Open the catalog to page 19