General catalogue_SICES Genset controllers
28Pages

SICES Srl provides a wide range of smart genset controllers for several applications like: ATS - Automatic Transfer Switch AMF - Automatic Mains Failure Synchro/Parallel applications like: MPM - Multiple Prime Mover MSB - Multiple Stand-by SPtM and MPtM - Single and Multiple Parallel to Mains SSTP and MSTP - Single and Multiple Short Time Parallel

Since 1977, SICES Srl designs and manufactures Electronic Devices and Electric Control Panels for the management of Gensets by any producer and brand. Starting from the project up to the production and to the start-up of the plants, every process is performed by a qualified and skilled staff thanks to the high technical experience. With technologic pioneering, SICES started developing the first micro-processed Control Devices in the early ‘80s, becoming one of the first players for the high standard in quality, reliability and innovation, both in the control and management of gensets. SICES...

Technical comparison SICES ATS & AMF Controllers Pag. 7 Synchro/Parallel controllers for Island mode & Mains parallel Technical comparison SICES SYNCHRO/PARALLEL Controllers Pag. 15 DITHERM, DMT, DIGRIN, DANOUT REWIND & DANCE ELECTRIC FUEL PUMP 230V MANAGEMENT • Configuration Tools: BoardPRG3 and PLC Editor Pag. 21 • Remote control systems: Sices Supervisor 3 and SI.MO.NE. Pag. 22 General catalogue genset controllers

SPM Single Prime Mover No Mains Circuit Breaker (MCB) Genset Circuit Breaker (GCB) control Engine and alternator protections monitoring Remote start control and date / time scheduler Models of genset controllers: GC250 / GC315 / GC350 AMF & ATS Automatic Mains Failure & Automatic transfer switch Mains Circuit Breaker (MCB) control Genset Circuit Breaker (GCB) control Engine and alternator protections monitoring (AMF) Remote start control and date / time scheduler Models of genset controllers: GC250 / GC315 / GC350 General catalogue genset controllers_REV.6

SICES Srl provides reliable controllers they are fully designed and made in Italy, assuring high quality standard solutions for the management of a genset.

ATS controller is able to manage the switch between two sources (Mains or ATS115p'"5 offers some additional communication tools for the remote control. New entry level AMF&ATS and AUTO START Genset controller which includes the main engine and alternator protections with True RMS readings. 3 Phases Mains sensing + 3 Phases Generator sensing Current readings included Powerful AMF&ATS and SPM Genset controller which includes the main en- gine and alternator protections with True RMS readings. Just one product for analogue (with sensors) and CANBUS J1939 engines. Three versions available based...

Technical comparison - SICES ATS & AMF Controllers General catalogue genset controllers_REV.6

MODEM GSM/PSTN management (external device REWIND) (external device REWIND) GPRS/GSM/GPS communications (external device REWIND) DIGITAL INPUT DIGITAL OUTPUT ANALOGUE INPUT Additional DIGITAL INPUT/OUTPUT 10 Conf. Input 10 Input from the 10 Conf. Input 10 Input from 10 Conf. Input 10 Input from 10 Conf. Input 10 Input from the CANBUS list 4 Conf. Output Additional ANALOGICAL INPUT/OUTPUT the CANBUS list 4 Conf. Output the CANBUS list 4 Conf. Output CANBUS list 4 Conf. Output Periodical test Auto starting with timer Auto starting inhibition Events and data logging Fuel management Alternative...

When the load is supplied by several gensets connected on a bus and working in parallel, we talk about SYNCHRO/ PARALLEL applications. For example big factories, hospitals, datacentre need more than one genset able to supply the load in case of mains failure. Additionally, in case of desert plants where the Mains is not available, It’s required the power of several gensets in order to supply the load. SICES Srl provides different types of Genset controllers able to monitor up to 24 gensets connected on the same bus and able to control all the operations for the synchronization and load...

Synchro/Parallel controllers for Island mode & Mains parallel functions Entry level Synchro/Parallel controller perfect for rental GC400 is well recommended in case of Multiple Prime Mover or Multiple Stand By power stations. In this last case, an external logic (i.e. ATS115) is required for the detection of the mains failure and the signal of start/stop to GC400Mfl,,aS is the perfect solution for the Short Time Parallel applications where it's necessary to avoid any lack of voltage during the reverse synchronization. GC400Lmk is a special version including a powerful modem GSM/GPRS for a...

New powerful Synchro/Parallel controller for Island mode and Mains parallel functions with integrated PLC Enhanced colour display as standard. Huge set of communication serial ports on board. Available in different versions in coherence to the type of Advanced Synchro/Parallel controller for Island mode and Mains parallel function (integrated PLC editor). Available with colour display with the version Evolution. Up to 24 gensets connected on the same bus. Perfect for CHP stations thanks to the huge number of I/O and the great possibility to expand them. Supervisor controller for multiple...

MPM - Multiple Prime Mover No Mains Circuit Breaker (MCB) Genset Circuit Breakers (GCB) control Engine and alternator protections monitoring Synchronization, Load sharing and Paralleling function Models of genset controllers: GC400 / GC500Plus / GC600 / DST4602 / DST4602Evolution MSB - Multiple Stand-by Mains Circuit Breaker (MCB) control - handled by an external logic, like ATS115 Genset Circuit Breakers (GCB) control Engine and alternator protections monitoring Synchronization, Load sharing and Paralleling function Models of genset controllers: GC400 / GC500Plus / GC600 / DST4602 /...

GC400, GC400Mains and GC400Link Entry level Synchro/Parallel controller able to manage MPM or MSB plants in case of GC400. For those plants composed by one genset able to perform the short parallel to mains and/or the back/reverse synchronization, the GC400Mains is recommended. USB Port, RS232, Insulated RS485 Modbus RTU and RJ45 Ethernet Modbus TCP/IP already built in. MODEM GPRS and antenna GPS with proper interface for SI.MO.NE are included in GC400Link. , Your solution for Rental gensets! Synchronizer and Load sharing included. GC500Plus, GC500Mains, GC500R Genset controller for...