GC600 - Synchro/Parallel genset controller with colour display
8Pages

 Powerful dual processor-based controller designed to manage production or emergency power plants composed by gensets working in parallel among them and/or with the mains.  Available in two versions: GC600 and GC600Mains  Graphic colour display TFT 4.3’’ - 480x272 pixel - Visual area 95 x 54 mm  PLC functions included  It can be interfaced with both CANBUS J1939 electronic engines and traditional engines with digital/analogue sensors.  Measurements: Mains/Bus and Genset Voltage; Genset Currents (.../5A or ../1A); Mains/Bus/Genset Frequency; Active, Reactive and Apparent Power; Engine speed; D+  N. 18 Configurable opto-insulated digital Inputs  N. 7 analogue Inputs including oil pressure, oil temperature, water temperature, fuel  Great performances  Attractive coloured display  PLC functions inbuilt  Several I/O with possibility of expansion modules  Several communication ports on board  Integrated hardware watchdog level. , which can be used also as digital Inputs or resistive, voltage or current analogue inputs.  N. 2 Insulated outputs for the regulation of the speed control and AVR.  PWM (500Hz) direct interface with CATERPILLAR and gensets with similar regulation system  N. 18 Configurable digital Outputs  Communication: N.2 MODBUS RTU Serial Ports: RS232 and insulated RS485 N.1 Ethernet Port 10/100Mbps N.1 USB FUNCTION for the configuration and N.1 USB HOST as data logger Setup for internal WI-FI  Internal clock with history log  Front protection degree: IP65 with gasket always free  Direct interface to SI.MO.NE. for the re

GC600 is a new powerful genset controller equipped with a dual processor, designed for synchro/parallel applications including plants with multiple gensets and power stations with gensets in parallel with the Mains (Public Utility). Based on the type of plant, the most convenient version is available: GC600 is well recommended in case of Multiple gensets working in parallel and load-sharing systems (island mode) and Multiple Parallel to the Mains included); GC600Mains is the perfect solution for the management of a genset working in parallel to the Mains by the internal power regulator....

Engine revolution counter: By pick-up. Programmable teeth number. Same input can be used by W signal. D+ for the measure of the voltage alternator battery charger Active and reactive power, power factor are available as total measure and also for each single phase. Maximum power and current reached values, are memorized with date and time. Additional analogical measures related to the engine are available in case of engines with CANBUS J1939 interface. Mains live / Disabled (for GC600Mains only) Generator live GCB status MCB status (for GC600Mains only) BUS live Engine running Engine...

GC600Mains controls AVR directly in order to manage the reactive power. The languages available are: English, Italian and Brazilian/ Portuguese. French, Spanish and Russian available soon.  N. 18+1 Programmable digital inputs (N.1 for the Emergency stop push button)  N. 4 Analogue inputs (water temperature, oil pressure, oil temperature, fuel level), if not used, can be used to: ○ Digital inputs (not insulated) ○ Resistive analogue inputs ○ Voltage analogue inputs 0...10V ○ Current analogue inputs 0...20mA (adding an external resistance) N. 2 Additional analogue inputs 0...10V N. 1...

Empowering your control (MULTIPLE PRIME MOVER) u^mm. (SINGLE PARALLEL to MAINS+SINGLE STAND BY)

SI.MO.NE Central monitoring system REMOTE MONITORING CONTROL Empowering your control Van SICH fMMiitlH UbeniKiiiiKo . ■ Mt fu,ta> MMI^H S I Ul ■• I ELECTRONIC ENGINE EXPANSION MODULES UP TO 16 GENSETS FOR DIGITAL AND ANALOGUE I/O IN PARALLEL ON THE SAME BUS

Empowering your control

Empowering your control Societa Italiana Costruzioni Elettriche Sumirago 21040 - Jerago con Orago (VA) ITALY SICES BRASIL LTDA Condommio Empresarial ONIX