DITHERM
7Pages

DITHERM DIGRIN DIVIT & DANOUT Modules for additional analogue I/O DITHERM, DIGRIN, DIVIT are electronic modules able to extend the number of analogue Input of several SICES genset controllers. DANOUT is a module for extending the number of analogue Output of SICES controllers. In detail: DITHERM module allows the contemporary connection of different types of thermocouples. It is equipped with three insulated channels. DIGRIN module allows the contemporary connection of different types of thermo resistances. It is equipped with three insulated channels. DIVIT is a module which provide voltage and current signals 0..05V - 0...10V and 0...10mA - 0...20mA using four different and insulated lines. DANOUT is an auxiliary module able to provide voltage and current signals as Output 0..05V - 0...10V and 0...10mA - 0...20mA These modules can be connected to: DST4602, GCXXX DST4601PX

DITHERM It allows to get up to 3 signals from thermocouples. Input are insulated and it’s possible to contemporary connect different types of thermocouples. DITHERM can be connected to the following genset controllers: DST4602, GCXXX and DST4601PX, using the canbus interface. DITHERM is available even with RS485 Modbus RTU. Using this version it’s possible to monitor the measures of thermocouples even from remote using the proper software Sices Supevisor It’s possible to set thresholds of alarms and warnings for each temperature input having proper timing for warning. . The type of the...

DIGRIN DIGRIN module allows to connect 3 independent and galvanic insulated thermoresistences PT100 type. This additional module is available for DST4602, GCXXX and DST4601PX, using canbus connection. By means a configuration switch it’s possible to select the protocol type (i.e. J1939 or Ex-bus, Sices ’proprietary protocol). Using J1939 protocol it’s possible to use Nr.2 modules and with a maximum of 5 thermoresistences for measuring bearing and windings alternator temperatures. On the other hand, using Ex-bus protocol it’s possible to connect up to 16 modules. DIGRIN is available even in...

DIVIT DIVIT is an auxiliary module able to acquire voltage and current signals 0..05V - 0...10V and 0...10mA - 0...20mA current loop using four different and galvanic insulated channels and power lines. DIVIT module can be used for acquiring 4 different measures by using the proper parameter set point. The value of the measured magnitude is directly transmitted. The format of data has an absolute and dynamic range comprised from –237 and +1735 with a selectable decimal point position. For each channel one descriptive alphanumeric string can be set on the gen set controller and also define...

DANOUT DANOUT is an auxiliary module able to provide voltage and current signals 0..05V - 0...10V and 0...10mA - 0...20mA current loop using four different and galvanic insulated channels and power lines. DANOUT is available in two versions: Canbus (using the proper EX-BUS protocol) or Modbus RS485 communication. Both versions have galvanic insulated communications lines. An additional RS232 (not insulated) is available by means jack for setting the device. DANOUT can be connected to the following Sices gen set controllers: - DST4602, - GCXXX - DST4601PX Dimensions: Weight: If required,...

fLLAHM CUJTPUl Empowering your control loooo Q|oo|_y^

Empowering your control Societa Italiana Costruzioni Elettriche Sumirago 21040 - Jerago con Orago (VA) ITALY SICES BRASIL LTDA Avenida Jurua 105 - Barueri - Bloco 5