ATS115 - Multifunctional Automatic Transfer Switch controller

Product catalog summary

Overview: The document describes the ATS115 and ATS115 Plus, micro-processed controllers designed for automatic and manual switching between two power supply sources, which can be either mains or gensets. These devices are capable of managing multiple plant configurations and offer programmable circuit parameters for both standard and specific applications.

Key Features:

Automatic and programmable management of supply source changeover.
True RMS measurement for current and voltage, active power, power factor, frequency, and power of both sources.
8+3 programmable digital inputs and 8 programmable digital outputs.
USB and Ethernet ports available on ATS115 Plus.
Graphic display with single-line diagram representation and real-time clock.
Events and data recording capabilities.

Specifications:

Voltage measurement for both sources with a maximum of 300Vac.
Current measurement with nominal max. current of /5A and /1A, and overload measurable current of 4 x 5Aac.
Frequency resolution of 0.1 Hz with high accuracy.
Controller battery voltage resolution of 0.1V.

Status and Signals:

Indicators for source live status, circuit breaker status, remote start, battery failure, and emergency stop.
Protections against various faults such as source breakdown, circuit breaker issues, and phase sequence failures.

Inputs and Outputs:

8 digital inputs, 3 analogue inputs, 2 programmable relay outputs, and 4 insulated digital outputs.
All inputs and outputs are freely programmable.

Communication and Interfaces:

ATS115 includes a USB port for PC setup.
ATS115 Plus includes additional serial ports, Ethernet interface, and CANBUS J1939 Interface.
Optional communication interfaces include RS232/485, Ethernet, GSM/GPRS/GPS modem, and supervisor software for Windows.

Environmental and Physical Specifications:

Supply voltage range: 7…32 Vdc with typical power consumption less than 2W.
Operating frequency: 50Hz or 60Hz.
Operating temperature: -25 °C to 60 °C with IP65 protection degree.
Dimensions: 247x187mm with a panel cutout of 218x159mm.
Conforms to EMC standard EN61326-1 and safety standard EN61010-1.

Additional Features:

Multilingual display options including English, Italian, French, Russian, and Portuguese/Brazilian.
Optional tropicalized version for adverse environmental conditions.

Catalog excerpts

ATS115 - Multifunctional Automatic Transfer Switch controller-1

Empowering your control "Automatic Transfer Switch" Multifunctional controller • Micro-processed controller able to manage the automatic switch between two supply sources, whether it is about mains or gensets • Automatic and programmable management of the changeover between the two supply • True RMS measure for both sources Current and Voltage • Active power and power factor measure • Measure of both sources Frequency and Power • 8+3 programmable digital INPUTS (insulated) • 8 programmable digital OUTPUTS • USB Port and ETHERNET Port (for ATS115 ) • Graphic display with single-line diagram representation • Real Time Clock

Open the catalog to page 1

ATS115 - Multifunctional Automatic Transfer Switch controller-2

Micro-processed controller for the automatic and manual switch between two supply sources (A or B). ATS115/ATS115Plus is a device able to manage the switch of multiple plant configurations. A or B supply sources can be set as “Mains” or “Genset” in every possible combination. The programmable circuit parameters allow its use for standard or specific applications. They can be set by the free software BOARD PRG, downloadable from the website. Nevertheless, the set up can be directly managed using the keyboard of the controller. ATS115, in its two versions, has a graphic display that allows to visualize...

Open the catalog to page 2

ATS115 - Multifunctional Automatic Transfer Switch controller-3

N.1 USB Port N.1 Serial port RS232 Modbus RTU N.1 Insulated serial port RS485 Modbus RTU N.1 RJ45 Port as Ethernet interface TCP/IP CANBUS J1939 Interface Optional:  N. 1 RS232 Serial Port Modbus RTU  N. 1 Insulated RS485 Serial Port Modbus RTU  N. 1 Ethernet RJ45 Port Modbus TCP/IP  RS232/485/USB Converter  GSM/GPRS/GPS Modem (REWIND)  Direct management Modem PSTN/GSM, data call in case of alarm. Status and Commands via SMS.  Supervisor Software for Windows ATS115 and ATS115Plus are multilingual devices. The available display languages are: English, Italian, French, Russian and Portuguese/Brazilian....

Open the catalog to page 3

ATS115 - Multifunctional Automatic Transfer Switch controller-4

Societa Italiana Costruzioni Elettriche Sumirago 21040 - Jerago con Orago (VA) ITALY Condommio empresarial ONIX, galpao 3 e 4

Open the catalog to page 4

All S.I.C.E.S. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list