
The MFC4000 series gas mass flow controllers are designed for non-corrosive gas flow control applications with a full-scale mass flow rate ranging from 50 mLn/min to 1000 mLn/min. Both analog and RS485 Modbus interfaces are available. The MFC4000 is specifically designed for instrumentation or portable device applications, featuring a tiny form factor. Other standard communication options can be customized upon request. • MEMS thermal calorimetry with diffusivity (The/mal-D ®) • Extended dynamic control range • High precision with a fast control time • Stainless steel package • Small form factor
Open the catalog to page 1Flow range o ~ 50,100, 200, 500, 750, 1000 mLn/min Accuracy ± 1.0% (20 ~ 100% of full scale), ±0.2%FS (<20% of full scale) Repeatability ± 0.3% (20 ~ 100% of full scale), ±0.06%FS (<20% of full scale) Control pressure range 0.1 ~ 0.8 MPa Setpoint source (input signal) Analog: 0 ~ 5 Vdc; Digital: RS485 Settling time 100 msec External leakage rate (He) ^1 * 10-9 Pa-m3/s Output signal Analog: 0 ~ 5 Vdc; Digital: RS485 Mechanical connection UNF 10-32-female, or compression tube fitting 93mm Note: Parameters specified at the calibration conditions. Default setpoint source: 0 - analog; 1 - digital....
Open the catalog to page 22 Pages
2 Pages
4 Pages
5 Pages
2 Pages
2 Pages
3 Pages
2 Pages
8 Pages
5 Pages
4 Pages
2 Pages
2 Pages
98 Pages
3 Pages
4 Pages
4 Pages
3 Pages
3 Pages
4 Pages
4 Pages
3 Pages
3 Pages
2 Pages
3 Pages
4 Pages
4 Pages
2 Pages
3 Pages
2 Pages