
The MFC1600 series gas mass flow controllers are designed for non-corrosive gas flow control applications with a full-scale mass flow rate of from 50 mLn/min up to 20 Ln/min. Both analog and RS485 Modbus interfaces are available for the control schedules. MFC1600 features a cost-effective aluminum alloy package, operates in a pressure range of 0.1 to 0.8 MPa (15 to 120 PSI), and has a compensated temperature range of 0 to 50°C. Typical applications include thin-film deposition and medical equipment. • MEMS thermal calorimetry with diffusivity (The/mal-D ®) • Extended dynamic flow control range of 100:1 • Fast control time • Aluminum alloy package
Open the catalog to page 1Gas Mass Flow Controller – MFC1600 series ± 0.5% (20 ~ 100% of full scale), ±0.1%FS (<20% of full scale) Flow range Turn-down ratio Control pressure range Maximum operating diff. Pres. Setpoint source (input signal) Settling time Working temperature Burst pressure External leakage rate (He) Power supply Output signal Electrical connector DB9 G 1/4” ~ 3/8”; Quick-twist fitting Double ferrule compression tube fitting 0 °C, 101.325 kPa, air Mechanical connection Reference conditions Note: Parameters specified at the calibration conditions. Gas: A – air, N2, O2, Ar. Default setpoint source: 0 – analog;...
Open the catalog to page 22 Pages
2 Pages
2 Pages
4 Pages
5 Pages
2 Pages
3 Pages
2 Pages
8 Pages
5 Pages
4 Pages
2 Pages
2 Pages
98 Pages
3 Pages
4 Pages
4 Pages
3 Pages
3 Pages
4 Pages
4 Pages
3 Pages
3 Pages
2 Pages
3 Pages
4 Pages
4 Pages
2 Pages
3 Pages
2 Pages