> Differential pressure sensing > Sensitive to low differential pressure > Manifold flow sensing > Bypass flow measurement The FSP1000 differential pressure sensors are designed for low differential-pressure measurements and manufactured using Siargo's proprietary MEMS sensing technology. The sensors measure unidirectional or bidirectional differential pressure with flow passing through. The current models can be readily applied to various medical applications, such as CPAP ventilators and HVAC control. The FSP1000 can measure differential pressures ranging from 2 Pa to 500 Pa. SDA, PC data Analog output (+) VCC, power supply (+) GND, ground Siargo Ltd. 4677 Old Ironsides Drive, Suite 310, Santa Clara, CA 95054 +1 (408) 969.0368 [email protected] www.Siargo.com

Siargo Pressure Sensor Datasheet Model: FSP1000 Specifications Value ➢ Differential pressure sensing ➢ Sensitive to low differential pressure ➢ Cost-effective ➢ Optional gas temperature ➢ Manifold flow sensing ➢ Bypass flow measurement ➢ HVAC ➢ Ventilator ➢ CPAP Differential pressure Power supply Output Output resolution Response time Pneumatic flow resistance Span accuracy Span repeatability Span temperature shift Temperature range Offset tolerance Offset repeatability Altitude correction Full compensated Maximum pressure Humidity Warm-up time Storage temperature Vibration Compliance ➢ All specifications...

> Differential pressure sensing > Sensitive to low differential pressure > Manifold flow sensing > Bypass flow measurement Note: for differentia pressure (flow) measurement, Port Pi should be placed upstream, unless a bi-directional model Product selection and order The product part number consists of the product model number and suffixes, each indicating a selectable parameter. Refertothe following for details. I- Pressure direction: U - uni-directional; B - bi-directional Differential pressure range: 50, ioo, 250, 500 Pa 1. Example: FSP1000-500-EV-B: the differential pressure range will be...