The FS1015E series mass flow sensors are designed for medical equipment gas-flow monitoring and control applications with Siargo’s proprietary MEMS Thermal-D sensing chip. The sensors directly measure mass flow with minimal pressure loss. They can be readily applied to ventilators, endoscopes, and anesthesia equipment. FS1015E can measure a flow up to 150 SLPM. The ISO 15 mm medical connection is designed for seamless plug-and-play compatibility with medical equipment. Insta lation holes > Gas mass flow sensors Power & data Cable socket female outlet Note: The standard products come with ISO-ismm connectors. For other types of connectors, a metal adapter can be added upon request. Analog output, 0.5 - 4.5 Vdc VCC, power 8-24 Vdc GND, ground Note: The product requires a power supply of 5 ± 5% Vdc. This voltage is internally filtered and regulated. However, the analog output might be influenced if the supply voltage has large deviations. It is advised to turn off the power when plugging in or unplugging the cable to avoid any damage. 4677 Old Ironsides Drive, Suite 310, Santa Clara, CA 95054 +1 (408) 969.0368 [email protected] www.Siargo.com

Siargo Mass Flow Sensor Datasheet Model: FS1015E ➢ Gas mass flow sensors ➢ ISO 15mm connectors ➢ Ventilators ➢ Endoscopes ➢ Anesthesia ➢ Cell analyzer Flow range Accuracy (total error band) Repeatability Turn-down ratio Response time Working temperature Temperature coefficient Maximum pressure Pressure drop at full scale Humidity Analog null shift Power supply Working current Output Analog output load Maximum overflow Maximum flow change Storage temperature Weight RoHS; REACH ➢ All specifications listed in the following table, unless otherwise noted, apply for calibration conditions at 20°C and...

Siargo Mass Flow Sensor Datasheet Model: FS1015E Mechanical dimensions ➢ Gas mass flow sensors ➢ ISO 15mm connectors ➢ Ventilators ➢ Endoscopes ➢ Anesthesia ➢ Cell analyzer FS1015E mechanical dimensions with ISO15mm connectors. FS1015E mechanical dimensions with ½” NPT connectors. 4677 Old Ironsides Drive, Suite 310, Santa Clara, CA 95054 +1 (408) 969.0368 [email protected] ww

> Gas mass flow sensors for other gases, please contact the manufacturer. Mechanical connector: ISO-ISOismm; N - NPT V4"-male. Full scale flow rate: 100 or 150; default unit is SLPM. For other ranges, please contact the manufacturer. 4677 Old Ironsides Drive, Suite 310, Santa Clara, CA 95054 +1 (408) 969.0368 [email protected] www.Siargo.com