*mydirectindustry

Catalogs
SIAP+MICROS
Datalogger e016d NanoSUM

Datalogger e016d NanoSUM

Product catalog summary

Overview
The NanoSUM is an acquisition and communication system designed by SIAP+MICROS, offering a compact and cost-effective solution for environmental monitoring. It is suitable for integration with sensors or systems with serial outputs and can be housed in various enclosures, with or without an integrated battery power system. The device supports data acquisition and transmission via FTP, with programmable frequency settings.

Hardware Specifications

Processor: Dual Core ARM Cortex A7 1.3 GHz and ARM Cortex M4 32 MHz
Memory: 32 Mb RAM, 4 Mb Flash, optional µSD card for data backup
Communication Interfaces: Modbus (RS-485, RS-232, RS-422), SDI-12, µUSB for configuration
Frequency Bands: Supports 2G and 4G cat M1/NB1 across multiple bands
Diagnostic Parameters: Battery voltage, solar panel voltage, signal quality (RSSI), internal temperature, and humidity

Power Supply and Consumption

Power Options: Battery-powered (12 Vdc), photovoltaic panel (28 Vdc), lithium battery (6-30 Vdc)
Battery Charger: Max 60 W input power, max 3.2 A input current, MPPT, temperature compensated end-charge voltage
Consumption: <0.4 mA in quiescent mode, <5 mA in active mode

Operating Conditions

Temperature Range: -40°C to +80°C
Humidity Range: 0% to 100%

Product Features

Integrated acquisition and communication system
Ultra-low power consumption
Ease of maintenance with parallel task execution
Available in IP68 enclosure

Ordering Information

Standard Model: NanoSUM with 2G/4G communication, integrated antenna, and GPS (PEM-e016c-NANO)
IP68 Model: NanoSUM with IP68 rating, 2G/4G communication, integrated antenna, GPS, and lithium battery up to 19,000 mA (PEM-e016d-NANO-IP68)

Catalog excerpts

Since 1925 Environmental Monitoring Solutions ACQUISITION AND COMMUNICATIONSYSTEM e016d NanoSUM Good price-quality ratio Ultra low power consumption MODBUS and SDI12 serial interface available

Open the catalog to page 1

The NanoSUM acquisition and communication system was designed by SIAP+MICROS as a compact and cost-effective acquisition/ communication system to be associated with sensors or systems, with serial output. Depending on the type of application it can be housed in different enclosures, with or without an integrated battery power system. In all cases both the frequency of data acquisition and the frequency of data sending with FTP protocol can be programmed on the device. NanoSUM can also be equipped with a built-in GPS receiver for the purpose of georeferencing the data or for synchronizing the...

Open the catalog to page 2

All SIAP+MICROS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list