Specifications:
The document details specifications for square and rectangular galvanized wire mesh panels. The galvanized covering surface is between 40-60 grams per square meter. Panels can be customized according to customer needs.

Product Details:
The document lists various mesh codes with their respective mesh sizes (from middle to middle), wire diameter, and panel sizes (width x length). The units are in millimeters, with a tolerance of less than 0.003 per unit of measurement, adhering to the International System n.80/81 CEE.

Product Codes and Sizes:
- Code 1.Z007: Mesh 30x30, Wire Ø 2.85, Panel Size 1215x2400 mm
- Code 1.Z018: Mesh 40x40, Wire Ø 3.80, Panel Size 1125x2200 mm
- Code 1.Z021: Mesh 40x40, Wire Ø 3.80, Panel Size 1200x2400 mm
- Code 1.Z008: Mesh 50x50, Wire Ø 2.85, Panel Size 1200x2400 mm
- Code 1.Z042: Mesh 50x50, Wire Ø 3.80, Panel Size 1000x2000 mm
- Code 1.Z012: Mesh 50x50, Wire Ø 3.80, Panel Size 1200x2400 mm
- Code 1.Z015: Mesh 50x50, Wire Ø 4.80, Panel Size 1200x2400 mm
- Code 1.Z014: Mesh 50x100, Wire Ø 3.80, Panel Size 1200x2400 mm
- Code 1.R080: Mesh 25x25, Wire Ø 2.85, Panel Size 1225x2000 mm

Stock and Delivery:
Panels marked with an asterisk (*) are ready for delivery.

Standards and Testing:
For structural use, panels must undergo tests as per Directive 89/106/EEC, which is the responsibility of the customer.

Special Meshes:
TEC®, RT®, MC®, DVA® are special meshes identified by SIA-MPL since 1964.