AURORA 320 SERIES SINGLE STAGE END SUCTION PUMPS BROCHURE
8Pages

SINGLE STAGE END SUCTION PUMPS WWW.AURORAPUMP.COM

SINGLE STAGE END SUCTION PUMPS Single Stage End Suction Pumps Capacities to 400 GPM (75 m3/hr) Heads to 210 Feet (42 Meters) Temperatures to 225° F (107°C) Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years ago. The variety of liquids being handled has increased along with temperatures and pressures. Today’s installations demand quiet, smooth-running pumps with long life. Aurora’s 90 years of experience with design, sales and manufacturing of centrifugal pumps has led to the 320 Series. These modern pumps with a clean,...

SINGLE STAGE END SUCTION PUMPS A. Low Noise Level Close Coupled Motors are built to Aurora® Pump's exacting vibration specifications. B. Vertical Center-Line Discharge makes pump self-venting, avoids vapor locks and minimizes pipe strain. D. Case Wearing Ring prevents wear on casing and is easily and inexpensively replaced. Standard ring is bronze. E. Lubrication Fittings are conveniently located for quick accessibility and provide positive bearing lubrication. G. Stainless Steel Shaft designed for minimum deflection, not to exceed .002" at the sealing faces at maximum load. H. Oil Seals...

SINGLE STAGE END SUCTION PUMPS Individual performance curves should be checked for final selection. For selections not shown on this chart, please refer to the factory. CAPACITY – CUBIC METERS PER HOUR TOTAL DYNAMIC HEAD – METERS TOTAL DYNAMIC HEAD – FEET

SINGLE STAGE END SUCTION PUMPS Individual performance curves should be checked for final selection. For selections not shown on this chart, please refer to the factory. TOTAL DYNAMIC HEAD – FEET TOTAL DYNAMIC HEAD – METERS 20 15 10 8 CAPACITY – CUBIC METERS PER HOUR

SINGLE STAGE END SUCTION PUMPS Dimension Details POSITION 2 Notes: 1. Dimensions and weights are approximate. 2. All dimensions are in inches (mm) and may vary ±1/4 (6). 3. Frame sizes, "C" and “AG", dimension and motor weight are TEFC motors only. 4. Conduit box is shown in approximate position. Dimensions are not specified as they vary with each motor manufacturer. 5. Add pump, base and motor weight for unit weight. 6. Not for construction purposes unless certified. 7. Discharge position No. 3 is not available on Models 323 and 324A. Position No. 1 is furnished as standard unless...

SINGLE STAGE END SUCTION PUMPS Engineering Specifications The contractor shall furnish (and install in location as shown on the plan) an Aurora® Type (321 horizontal) (323 flange mounted) (324A horizontal) centrifugal pump size(bronze fitted) (all bronze) (all iron) construction. Each pump shall have a capacity of gpm atft. total head andspecific gravity. The pump is to be furnished with case wearing ring and a mechanical seal, with all metal parts to be 316 stainless steel, Buna-N bellows, ceramic seat and carbon washer. Flexible Coupled Pumps Model 324A The pump shaft is to be stainless...

Viton is a registered trademark of DuPont Performance Elastomers L.L.C. Aurora is a registered trademark of Pentair Ltd. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. A-02-1011 07/17/15 © 2015 Pentair Ltd. All Rights Reserved. 800 AIRPORT ROAD, NORTH AURORA, ILLINOIS 60542 WWW.AURORAPUMP.COM