MODEL-7200A PORTABLE BALANCER • Tracking filter type balancer also available as a stroboscopic balancer without a photo sensor. • Equipped with a FFT function and an automatic sampling function as afrequency analyzer and printable on the built-in printer • Extension cable for the pickup 30 meters long (with a cable drum) • Electro-dynamic pickup (selectable from MODEL-2009, B9200, I-544) • Reflective type photosensor (optional) Applicable vibration pickup Vibration pickup input Rotational signal input electro-dynamic vibration velocity pickup (Three types of pickup below are selectable by a trim switch.) Channel A or Channel B (selectable) 0~5V rise-up signal of 1 pulse per revolution For indication of revolution and phase reference of the tracking filter

Vibration waveform output ±2V/FS Output impedance 100Q for the attached stroboscope (turned on and off by a switch) Display Digital LED display and indicators • Indication of FIL OUT vibration value / Overall vibration value • Indication of FIL IN vibration value / Filter pass value in Tracking or Man. Tune mode • Phase angle indication / 0 to 359 degrees angle between the rise of a revolution pulse and a positive peak of the vibration waveform of the component of revolution • LOCK indicator:Lights when the balancer is in synchronism with the revolution signal or the internal oscillator. • INPUT...