This system is most suitable for balance adjustment and for vibration measurement of various machinery or equipments, in which motors, turbines or blowers are incorporated. This system can also be used as tachometers. This system is small in size and light in weight and is contained in a shoulder case, and therefore, it can be conveniently carried to any places at which measurement will be made. ■ This system is furnished with functions as vibration meter, tachometer and balancer. ■ This system is contained in a shoulder case and is therefore portable. ■ Model 2007 Vibration Detector included in this system is small in size and can be hand-held when conducting measurement. ■ A xenon lamp employed in the Stroboscope enables to make measurement clearly. ■ This system is provided for the purpose of monitoring with output terminals with which waveform observation or recording can be made. ■ The amplifier is small in size and light in weitht and is composed of circuits of high reliability and stability employing IC's and semiconductors. ■ Control knobs and switches are all arranged on the front panel for convenient operation.

(1) The side surface of the rotating body is to be graduated in 0 to 360° to CCW direction. (2) The switch on the Balancer Main System is turned to FLAT. The vibration detector is applied to a test object in the manner as shown on the sketch and the amount of vibration indicated is read. (3) The stroboswitch is turned to ON and the switch on the Balancer Main System is turned from FLAT to FIL. Rotate the frequency dial to the extent at which the indicating pointer fluctuates in the maximum. Read the angle at which the rotating body looks standstill in the light from stroboscope. Amount of vibration...

Vibration Detector Measuring Ranges Speed Range Filter Characteristics Model 2007 Dynamo-Electric Type, 80 mV/cm/sec. Oscillation Frequency : Same with that of Filter (as functions of Tachometer) Monitor Output Power Supply Optional Accessorie : Handy Type with incorporated Xenon Lamp. ±5 mV Max./F.S., 20S7 or less. Provided with Output Adjustor. : Calculator for prompt adjustment and calculation of direction and weight at which correction should be made. BLOCK DIAGRAM COMPOSITIONS 1 set Portable Balancer Amplifier Model 7102A. 1 set Vibration Detector Model 2007 (complete with Contact Pin)....