Vibration Analysis System for Elevator This vibration analysis system complies with the elevator ride quality standards specified by ISO. Data are collected by the equipment placed on an elevator and analyzed by a PC. Possible to issue a calibration certificate required by ISO Appended with easy-to-use software for analyzing elevator ride quality (in Japanese and English) 3.5" color LCD installed; waveform possible to be checked on the main body

The easy-to-see color LCD enables reduction of erroneous measurement. As measured waveforms are displayed on the color LCD in real time, checking whether measurement and recording are properly proceeding as expected is enabled during measurement. Response axis: 3 axes (X, Y, Z) Frequency range: DC to 640 Hz Max. acceleration: 5G (49.03 m/s2) = 4,903 gal Resolution: 0.005 m/s2 (0.5 gal) Max. recording length: 10 minutes Sampling frequency: 250, 500, 1,000, and 2,000 Hz The equipment is ready for conducting measurement only by placing it on an elevator and triggering the measurement. Measured data...

z Various analyses required by ISO18738-1 can be easily conducted by using the dedicated software. z The equipment is useful for identifying causes of abnormal vibration, as frequency analysis (FFT) is also enabled. z The measurement report required by ISO18738-1 can be easily prepared by one click.

Specifications of the main body Max. acceleration Max. recording length Recording means Power supply Charging time Appearance of the main body and mass ±2V/full scale; BNC connector for each X, Y, and Z Recorded in the USB memory appended. 12V lithium-ion battery (continuous use of approx. 10 hrs) Approx. 10 hrs Software specifications Windows XP, Windows Vista, and Windows 7 Japanese and English Responds to the requirement of “6.5 Reporting of results” in ISO18738-1. Window function: Rectangular, Hamming, and Hanning Can be analyzed with raw data, and results of RMS, Average, and Filter for...