*mydirectindustry

MODEL-2590C

Product catalog summary

Overview: The Digital Monitor Model-2590C is designed to receive a 4-20mA signal from a vibration converter, scale it into a vibration value for digital display, and monitor the vibration using a 2-high limit position alarm contact output. It includes an operating power supply for the vibration converter to simplify installation.

Specifications:

Input Signal: 4-20mA with Span/Zero fine adjuster.
Indication Range: Configurable from 0 to the intended scale value.
Indicator: 7-segment red LED, 5-digit display.
Sampling Cycle: Adjustable to 0.125, 0.25, 0.5, 1, 2, 3, 4, or 5 seconds.
Accuracy: ±0.3% ±1 digit at 23°C ±5°C.
Power Supply for Converter: +24VDC, 100mA max.
Alarm Setting: Two alarms, AL1 (HH) and AL2 (H).
Alarm Value Check: Indicated by pressing AL1 or AL2.
Alarm Relay Contact: Transfer rating of AC 250V 5A, DC 30V 5A max.
Alarm Delay: Adjustable from 0.1 to 99.9 seconds.
Analog Output (Optional): 4-20mA (500Ω max), 0-5V, 1-5V, 0-10V (5kΩ min).
Power Supply: AC 85-264V, 50/60Hz, 15VA max.
Operating Temperature and Humidity: 0-50°C, 45-85% RH max (no dewing).
Front Panel: IP65 with rubber packing required.
Dimensions and Weight: 96(W)×48(H)×92(D) mm, approximately 300g.

Catalog excerpts

The Digital Monitor Model-2590C receives a 4-20mA signal from the vibration converter,scales it into a vibration converter scales it into a vibration value for digital display and allows the vibration to be monitored by using a 2-high limit position alarm contact output. As an operating power supply for vibration converter is incorporated to make installation easier. SPECIFICATIONS INPUT SIGNAL INDICATION RANGE INDICATOR SAMPPLING CYCLE ACCURACY POWER SUPPLY FOR CONVERTER ALARM SETTING ALARM VALUE CHECK ALARM RELAY CONTACT ALARM DELAY ANALOG OUTPUT(OPTION) POWER SUPPLY OPERATING TEMP.AND HUMIDITY FRONT PANEL DIMENSIONS AND WEIGHT 4-20mA(Span/Zero fine adjuster provided) Can be set at 0 to intended value on scale value. 7-segment red LED,5-degit. Can be set at 0.125/0.25/0.5/1/2/3/4/5 seconds. ±0.3%±1digits(23°C±5°C) +24VDC,100mA max. 2 alarm.AL1(HH) and AL2(H) Indicated by pressing AL1 or AL2 Transfer rating AC 250V 5A ,DC30V 5A max. Can be set at 0.1-99.9 sec. as desired. 4-20mA(500Ωmax),0-5V,1-5V,0-10V,(5kΩmin) AC85-264V 50/60Hz,15VA max. 0-50°C,45-85%RH max.(No dewing shall occur.) IP65(need rubber packing) 96(W)×48(H)×92(D)mm Ap

Open the catalog to page 1

MODEL-2590C

MODEL-2590C

Catalog excerpts

All Showa Sokki Corporation catalogs and technical brochures