• General-purpose type small vibrometer capable of measuring three modes of acceleration, velocity and displacement. • Wide-band and capable of measuring from a minute level to a large level. • Maneuverable in field measurement because of the small size and use of dry cells. • Capable of selecting a band matching a measurement object because of the built-in high-pass/low-pass filter. • Capable of wave analysis and level recording with the attached AC and DC output terminals. • Capable of appropriately using various sensors with ease by the easy setting of the sensor’s sensitivity. • Capable of using a remote charge converter and a detector with a built-in preamp in addition to an ordinary charge-output type detector. Instruction manual lcopy ■ Charge Input Connector (BNC Connector on the front panel) Pickup Sensitivity (pC) PU SENSx1;1.00-9.9pC/G ■ Voltage Input Connector (BNC Connector on the real panel) Pickup Sensitivity (mV) pU SENSx1:1.00-9.99mV/G

Supply current 0.4-4mA (internal volume) ■ Remote Charge Converter Input (Option) Indicator Provided with dual scale 0-1,0-3 to indicate the magnitude of amplitude selected with the meter selector or battery voltage. When the linear range is exceeded in the internal circuit,LED lamp is on. Vibration waveform output ±1V/FS Output resistance 100Q 5mA Max.current Trend recording as level output 0-1VDC Output resistance 100Q 5mA Max.current Overload lamp AC OUT(BNC) Accuracy Within 3% at 80Hz,100pC input Cal signal 80Hz,±1V max. sinusoidal wave Power supply Dry cell LR6x4(DC6V) Continuous use more...