Vibration Monitor For Explosive Atmospheres Model-1500EX Detects unusually great vibrations and gives an alarm signal. Can be used in a hazardous area where explosive gasses or the like and in existence. ●Can be used in a hazardous area where explosive gases or the like are in existence. ●Vibration modes for acceleration, velocity and displacement can be select with internal switch. ●The housing is of pressure and explosion-proof construction. ●The sensor is combined with the amplifier via a flexible wire conduit. ●Alarm level setting at a step of 1% from 1 to 99% with internal digital switch. ●Two different alarming steps, one for self-holding operation and the other for automatic resetting operation are provided. ●Alarm delay of up to 60 seconds can be set to prevent an incorrect action. ●Usable for monitoring vibrations in motors, fans, piping, large-sized

SPECIFICATIONS Alarm setting range: (Select 1,2or3) Frequency range: Accuracy: Linearity: Driving power supply: Relay operation: Housing construction: Vibration resistance: Dielectric strength: ①Acceleration 1～99m/s2(Peak) ②Velocity 1～99mm/s(Peak) ③Displacement 0.01～0.99mm(P-P) 10～2000Hz(±10%) Within 5% (at 25℃,80Hz,10m/s2 measurement of sinusoidal wave ) Within 1% of full scale AC or DC100～220V(less than 10VA) Delay 0 to 60 sec variable Self-holding operation and automatic resetting operation ,make contact by solid state relay. (Resetting by turning off driving power supply) Contact rating AC/DC...