*mydirectindustry

Model-1500B

Product catalog summary

Overview: The Vibro-Switch Model-1500B is a compact and cost-effective device designed for accurate vibration monitoring with two upper limit alarms. It is suitable for use in motors, fans, and piping to detect excessive vibrations and provide alarm signals.

Key Features:

Selectable vibration modes for acceleration, velocity, and displacement via an internal switch.
Drip-proof aluminum housing with cable gland connectivity.
Alarm level settings adjustable from 1% to 99% using an internal digital switch.
Two alarm steps: self-holding and automatic resetting operations.
Alarm delay setting up to 60 seconds to prevent false alarms.
Low power consumption of 12mA at 24V DC.

Specifications:

Alarm Setting Range: Acceleration (1-99 m/s²), Velocity (1-99 mm/s), Displacement (0.01-0.99 mm P-P).
Frequency Characteristics: Acceleration (5-500Hz), Velocity (10-500Hz), Displacement (10-500Hz).
Accuracy: Within 5% at specified conditions.
Linearity: Within 1% of full scale.
Power Supply: DC24V±0.5V, 12mA typical, 20mA maximum.
Relay Operation: Delay 0 to 60 seconds, self-holding and automatic resetting, MOSFET make contact.
Housing Construction: Aluminum with neoprene packing, IP-64 protection.
Vibration Resistance: 10 m/s² for vibration, 100 m/s² for shock.
Dielectric Strength: 1500V AC between relay contact and housing/power supply for 1 minute.
Applicable Electric Wire: 0.2–2.5 mm² (AWG24–16).
Applicable Cable: Outside diameter of φ11–13 mm.
Operating Temperature: -10°C to +70°C.

Contact Information:

Head Office: 1-5-9, Kandaizumi-cho, Chiyoda-ku, Tokyo, 101-0024 JAPAN. Phone: 03-3866-3210, Fax: 03-3866-3060
Factory: 1547-1 Takao-cho, Hachioji, Tokyo, 193-0844 JAPAN. Phone: 042-664-3232, Fax: 042-664-3276
Website: http://www.showasokki.co.jp/
Email: [email protected]

Catalog excerpts

pond to the needs ;“sate and comfortable” ■HDWA Vibro-Switch Detects unusually great vibrations and gives an alarm signal. Sensor, alarm setting and alarm contact are entirely united in one body for ease of operation. • Compact design, low price and accurate vibration monitoring at 2 upper limits. •Vibration modes for acceleration, velocity and displacement are selectable with internal switch. •Drip-proof aluminum housing connectable with cable gland. •Alarm level setting at a step of 1% from 1 to 99% with internal digital switch •Two different alarming steps, one for self-holding operation and the other for automatic resetting operation are provided. •Alarm delay of up to 60 seconds can be set to prevent misfunction. •Usable for monitoring vibrations in motors, fans, piping,etc.

Open the catalog to page 1

Vibro-Switch SPECIFICATIONS ① Acceleration: 1∼99m/s2(p) 1∼99mm/s(p) ② Velocity: ③ Displacement: 0.01∼0.99mm(P-P) 5∼500Hz Frequency characteristics: Acceleration: 10∼500Hz Velocity: (+5％, -10％) 10∼500Hz Displacement: Accuracy: Within 5％ (25℃，80Hz, 10m/s2 measurement of sinusoidal wave) Linearity: Within 1％ of full scale Driving power supply: DC24V±0.5V, 12mA(Typ), 20mA(max) Relay operation: Delay 0 to 60 sec variable Self-holding operation and automatic resetting operation, make contact by MOSFET. (Resetting by turning off driving power supply) Contact rating AC/DC 125V, 0.5A Material Aluminium(with...

Open the catalog to page 2

Model-1500B

Model-1500B

Catalog excerpts

All Showa Sokki Corporation catalogs and technical brochures