SHOCK METER MODEL-1340B PEAK HOLD TYPE • Compact and lightweight. • Vibration acceleraton measurement in VIBRATION MODE and shock acceleration measurement in SHOCK MODE are available. • Easy reading of 0 to 2000m/s2 or 0 to 20000m/s2 without changing sensitivity. • Charge amplifier assures stable sensitivity. • Built-in low pass filter cuts unnecessary high-frequency waves. Digital Accelerometer Model 1340B Piezoelectric Pickup Model 2358 (with M6 screws,contact pin,handler) Low noise cable LNC-1A-3(3m) Magnet holder MG-1 Dry cell(2 AA battery) Small-size slotted screwdriver Shoulder case Operation Manual SPECIFICATIONS (1) INPUT TRANSDUCER Piezoelectric pickup Model 2304A Approx.50pC/m/s2 Charge input type,BNC connector (80Hz sine wave,100m/s2 vibration,23°C±3°C) VIBRATION Detection of absolute value of sine wave calibration, peak value indication. SHOCK Detection of mean value,peak hold. Releasable by reset button. Peak hold is effective for acceleration of 10m/s2

(For optional specifications,peak hold is effective for 100m/s2 For use in SHOCK MODE to clear held value. Sample rate VIBRATION About 3 times/sec. 1.5 V alkaline dry cell (LR6)*2 Continuous use for more than 20 houres Body Approx. 220g Full set with accessory Approx. 800g