Cold Storage Door
13Pages

SPEED FLEX® COLD ROOM DOORS

Cold Saver® fold up doors are designed to meet expectation of clients for high level insulation for areas like freezer / chiller rooms & Cold storages. Mainly losing of energy is occurred during door operations. Conventional sliding cold room doors are slow in operational speed, obstructs the forklift traffic resulting high energy consumptions. Cold Saver® door with high speed operation and specially designed for maintaining ambient environment between chilled and freezer area. 7/24 Operations Strong and flexible design of Cold Saver® high speed door can be operated 24 x 7...

TECHNICAL PROPERTIES Structure Structure is made from high straight extruded Aluminum (Alloy 6063-T6) fixed with bolt & only top cover is made by galvanised steel sheets. All side guides and bottom frames are manufactured to avoid welding, gap and rust. Stainless Steel AISI (304/306) or normal steel structure can be manufactured for special area. Insulation Data We specially design the door to avoid heat bridge and maximum isolations. Our patent pending design especially decreases thermal transmittance. Curtain Thermal insulation: U = 0.70 W/sq-mt.K (BS EN ISO 6946) Sound attenuation:

Fabric Fabric has long life and it has very high resistance against UV radiation, VALMEX POLYMAR ® Industrial Fire resist 900 gr/m2 1-2 mm 1100 Dtx B 6000 Panama SIO – LINE + DIN EN ISO 2286 – 2 –CE. Tensile Straight 4300/4000 N/50 mm DIN 53354. Tear Strength 500/500 N DIN 53363 Colour Wide range of fabric colours are available like RAL 9002-9006-1001 -3001 – 5007-6001-7071. *Some color is out of stock can be extend delivering time. Metalic grey - Ral 9006 Grey - Ral 7039 Light green - Ral 6019 Green - Ral

Isolation Material Extruded polystyrene foam (XPS) consists of closed cells, offers improved surface roughness and higher stiffness and reduced thermal conductivity. The density range is about 28–45 kg/m3. Thermal conductivity varies between 0.029 and 0.039 W/ (m·K) depending on bearing strength/density and the average value is ~0.035 W/ (m·K). Curtain thickness 40 mm U value (overall heat transfer co-efficient’) <1.5 W/m2.K Sound attenuation 18 dB A. Aluminum side rail has rubber sealant for extra isolation. Interior Heating System Heating system is used for special conditions btween...

Speed Cold Saver High Speed Doors can be operated at a standard 1.2 mt /sec (EN 12453) and speed range can be designed upto 150 cm/sec. Equipment Safety photo cell beam, thermic resistance, soft bottom edge, emergency button warning light and buzzer is supplied Standard equipment Optionally Bottom safety edge and pneumatic safety edge internal heater system is available. Safety All the doors are manufactured according to CE Standard- Industrial, commercial Product standard - Applicable Directives 89/106/EC-99/93/E Applicable Standards: - EN 13241-1:2003+A1:2011-EN 12978:2008. Motor...

Control board Control board is designed according to CE 2006/95 EC and NEMA ICS 2 Standard to operate 3 phase motor with rotative swicth. Audible and visual warning devices automatically signal for 5 seconds before any door section movement, remain continuously on while the door is in motion and reset immediately after movement stops. IP 65 Box Emergency button Circuit Breakers Warning light Buzzer ,Plug in technology. Options -Frequency converters control board with touch less button -Mono phase operators. Operations Speedd Flex® fabric door is guided up and down in the weather sealing...

VC FABRIC DOOR SYSTEMS SPEED FLEX® COLD ROOM DOORS