The Aluflex®MEDIUM SIZE HANGAR DOORS

The Alu-Flex Vertical lifting Fabric doors for large opening area Shipyarddoor, Alu Flex vertical lifting hangar door designed to solve large opening door requirements that don’t have reliable solutions with other standard door. Vertical lifting fabric hangar door was initially developed in the 1980s for the needs of shipyards' shipbuilding facilities. Cause of special requirements of shipyard industries doors need extreme properties. Shipyarddoor is manufactured first doors after increasing ship building business in Turkey at 2003.Special door requirements between hangar doors and standard doors...

TECHNICAL PROPERTIES Main Structure Doors are made of two fabrics folding in opposite directions. Fabric sections are fastened to horizontal beams ( T 6063 T6 Aluminum Extrusion). Minimum door thickness is 120 mm increased to 180 mm. Intermediate beams are retractable by an electric motor. The beams have tires for easy operations at windy conditions. The intermediate beams when retracted don’t impede the clear opening dimensions. Bottom Beams Bottom beam is designed according to wind resistance, dimension of the doors and, to carry load of intermediate steel beams during door operations. Bottom...

Side guides The Alu-Flex Vertical lifting Fabric door vertical guides are made of structural steel with a suitable depth and width depending on the size of intermediate beams. Guides are designed to provide weather-sealing between door and door frame. Side guides are designed and manufactured for easy replaceable in case of damage. Aluminum rails are fixed with bolt to steel structure. Cable System The Alu-Flex Vertical lifting Fabric door is operated with belt system, maximum of two belt each doors that are running inside the guides. Rainforced belts are installed free of any kinks and sheave...

Insulation Data The Alu-Flex Vertical lifting Fabric Door has excellent insulations due to extreme width and sealing properties. Thermal insulation value U<1.5 W/m2.K Isolated fabric also available Sound attenuation 16 dB A, Wind Resistance Shipyarddoor ® hangar door is designed as a unitary system to withstand wind load specified. Fiber stresses due to combined dead load and wind load will not exceed factors for material being used and type of loading sustained, operationally 120 km /h also at closed positions can be stand up to 180 km/h.Acording to door dimensions resistance can be change (Class...

Driving Unit and limit switches The lifting motors are normally located above the door opening. The limit switches are also located above door opening. The Alu-Flex Vertical lifting Fabric door switch system doesn’t miss or damage, all switches are located both sides with safety switch. The door stops on the limit switch when the door is completely opened or completely closed. Should the doors by-pass these limit switches there are also safety limit switches in both directions. In upward direction the limit switches are located above door. At each end of door and topmost moving horizontal door...

Color Wide range fabric color is available ,All main color at our stock (RAL 9002-9006-1001 -3001 – 5007-6001-7071) (some color is out of stock can be extend delivering time) *Some color is out of stock can be extend delivering time. Light green - Ral 6019 Green - Ral 6018

Operations The Alu-Flex Vertical lifting Fabric door is guide up and down with weather sealing vertical guides attached to the structure. Door is controlled by three buttons marked “Open,” “Closed,” and “Stop.” Audible and visual warning devices is started automatically signal for a few seconds before any door section movement, remain continuously on while the door is in motion and reset immediately after movement stops. Manual Operations; There are a few ways the emergency operation could be accomplished. - A hand crank that attaches to output shaft of the motor is available for manual operation....

SPEED FLEX® HANGAR DOORS