XGT-200 10G Ethernet Tester ShinewayTech® XGT-200 Ethernet tester provides a complete test for next generation Ethernet solution. There are many different test modules, which can help to verify the performance of their Ethernet. XGT-200 has two 10/100/1000Mb/s electrical interfaces, two 100/1000M SFP optical interfaces and two 10Gbps SFP+. It can generate and analyze the test traffic streams and provide the result. XGT-200 provides installation, maintenance services, and activates new profession services. XGT-200 can provide a variety of test functions, which can help user to control and know the quality of Ethernet. We believe that the XGT-200 will be the comprehensive and simple Ethernet and advanced IP connectivity test suites for the field technicians.

Features • Smart and durable, field application ready • 7-inch HD color touch screen, sun readable • User-friendly user interface • PC remote control • Test profiles and data management, USB/FTP transfer • Comprehensive testing for Ethernet testing • Lithium battery up to 4 hours continuous testing Functions: • 10GE SFP+ x2, 10/100/1000BASE-T RJ45 x2,100/1000BASE-X SFP x2 • 10M - 10Gb/s bandwidth, LAN and WAN mode • Layer 1/2/3/4 BERT test • Multi-stream traffic generation and analysis • RFC2544 and Y.1564 test • OAM test (optional) • VLAN and VLAN Q-in-Q test • MPLS test with multiple MPLS tags...

back, packet loss and latency measurement. All the test results can be clearly showed in the UI. ITU-T Y.1564 Test Service Configuration Test The service configuration test consists in sequentially testing each service in order to validate that each is properly provisioned and that all specific SLA parameters are met. Service configuration tests to confirm network can be configured to a single data stream to set CIR and select a single or mixed packet size for testing. Simultaneously, the option also can be set by the rate subjected to hierarchical e.g., 25%, 50%, 75%, 100%, and 100% + EIR or...

Once the configuration of each individual service is validated, the service performance test simultaneously validates the quality of all the services over time. All the processes just need a few minutes, and it also can be made a long time pressure test. BERT XGT-200 can support Layer 2-4 BERT test in the VLAN and MPLS. It can set BERT test data frame layer, frame size, bandwidth, MAC address, five parameters and the load area pseudorandom sequence type. XGT-200 can support standard pseudo-random code (PRBS31, PRBS23, PRBS20, PRBS15, PRBS11 and so on) pressure code test, and the engineers can...

Q-IN-Q XGT-200 can support layered applications for metropolitan area network or carrier Ethernet VLAN Q-in-Q and MPLS.

Multi-stream Background Traffic Generation and Analysis It is applicable to Ethernet frames environment to verify the long-term integrity of the Ethernet circuit. This test can supply throughput, packet loss and other error information, which will help user to verify Ethernet services compliance with regulatory requirements. Intelligent Detector and Loopback Independent scanning the test network, discover available XGT-200 device, and send the remote control data via test port, which will be added to the test system to complete the test.

Four Traffic Loopback Test: Layer1, Layer2, Layer3 and Layer4 Layer1: All data streams are passed through and loopback; Layer2: All unicast data stream based on source / destination MAC address make a loopback; Layer3: All unicast data stream based on source / destination MAC and IP address make a loopback; Layer4: All unicast data stream based on MAC/ IP address and port number of source / destinations make a loopback

Through Mode XGT-200 series support 10M-10G rate realize online monitoring, passive testing, online troubleshooting, and online fault injection. IP Tool XGT-200 can identify point-to-point ping and trace route.

VCSEL/LC/SFP+ DFB/LC/SFP+ CML/LC/SFP+ type

* Specifications subject to change without notice Order Information Model: XGT-200A: Two full function 10G test port, and 10G test port can make a punch through testing Standard Package XGT-200 Host, Battery, AC Adapter, Software CD, Carrying Case, User Manual, Warranty card Optional: CAT6 RJ-45 Gigabit Ethernet Cable LC-LC Duplex Patchcord 10G SFP+ Optical Module (Wavelength/Transmission Distance:850nm/550m,1310nm/10km,155 0nm/40km) 1.25G SFP Optical Module (Wavelength/Transmission Distance:850nm/550m,1310nm/10km) OAM Test Function Module Notice: According to the specific requirements, the specification...