PPM-50/51
3Pages

Specially designed for FTTx/PON (B/E/G) applications Easy operation: Connect fiber and get results Simultaneous Triple-play PON signals measurement: 1310/1490/1550nm (Voice/Data/Video) Pass-through test: Applicable anywhere on PON Burst mode 1310nm upstream signal detection User-defined thresholds on PPM-50 unit Pass/Warning/Fail assessment on PPM-50 unit Color TFT, readable under sunlight Compact design PPM-50 PON Power Meter can perform in-service testing of all PON signals (1310/1490/1550nm) at any spot on the network featuring pass-through design, burst mode and Pass/Warning/Fail assessment function, which can greatly help you evaluate PON signals transmission quality. Pass-through Simultaneous Measurement & Display of All PON Signals PPM-50 works as a pass-through device, which can be connected anywhere between OLT and ONU. A small percentage of optical signals are extracted for use by PPM-50 detectors. This approach enables all wavelengths to be used simultaneously and introduces no interruption to network services. • • Filtered detectors for individual signal measurement at each wavelength Pass-through connection and simultaneous measurement of all PON signals Upstream signal burst mode detection at 1310nm

User-defined Threshold Sets PPM-50 enables threshold setting—each set consists of three wavelengths (1310, 1490 and 1550nm) with their own Pass, Warning and Fail thresholds. These values can be configured for easy assessment of fibers, components and test points on network. Optical Power Meter Function PPM-51 enables more than seven wavelengths calibration. Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically identify the wavelength of the optical signals transmitted from SLS-50 and switch to the corresponding test mode, which greatly reduces the workload at...

Dependable Partner far future SetworAs Note: (1) Burst mode measurement range at 1310 nm: -30 ~ +10dBm (3) For Model A at 850nm, the lower limit of measurement range is -60 dBm (Model A) / -40dBm (Model B); Instrument, Lithium battery, Rubber boot, Data transfer cable (USB), PC Software CD, AC adapter, Toolkit for soft bag, Warranty card, CE certificate, Certificate of calibration, User manual.