OPM-50 Intelligent Optical Power Meter iFTTx ♦ Automatic wavelength identification ♦ Remote reference value setting ♦ FTTx applicable ♦ Internal clock & fiber S/N editable ♦ Memory of 1000 test records ♦ Data Transfer to PC via USB ♦ USB power charging ♦ No warm-up, quick start ♦ Backlight ♦ 70 hours continuous operation ♦ Pocketsize, lightweight and easy-to-use ♦ CE FCC certificates / \ OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality. v___/ Automatic Wavelength Identification Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically identify the wavelength of the optical signals transmitted from SLS-50 and switch to the corresponding test mode, which greatly reduces the workload at both ends and avoids potential error. Remote Reference Value Setting OPM-50 can receive the power parameters of digital-encrypted signal transmitted from SLS-50 as reference for precise link loss measurement even when the two units are far apart. Internal Clock & Fiber S/N Editable Internal clock enables OPM-50 to save test data with time and editable fiber SN information. Compatible with FTTx Test OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and 1550nm) on Passive Optical Network (PON).

Model Calibrated Power Range Fiber Type Singlemode/Multimode fibers Detector Type Auto Wavelength Identification Display Unit Data Storage Power Supply Battery Life Lithium Battery/ AC Adapter Continuous operation: 70 hours Power Saving Auto-off after 5 minutes idle Operating Temperature Storage Temperature Relative Humidity Note: (1) Other wavelengths are open for customization; (2) For Model A at 850nm, the lower limit of measurement range is -60 dBm (Model A) / -40dBm (Model B); * Specifications subject to change without notice Ordering Information Standard Package Includes: Instrument, Lithium...