Shin-Etsu Polymer Co.,Ltd ShiriltsuShin-Etsu lnter-Connector° 4X type FEATURES MT-type series are anisotropic conductive sheet type, which consists of soft silicone rubber and of gold-plated metal filaments embedded densely into it. This type of InterConnector is suitable for inspecting and connecting 1C packages such as BGA, QFP or SOP. Since MT-4X type has 4-time metal density, ti can be used to CSP. Especially, MT series are superrior in transmitting high cycle. ■ MT series Operating Temperature Range: °C Insulation Silicone Rubber(T-31 P) Insulation Silicone Rubber(T-31T) 40 m Gold-plated brass wire Inclined in the direction parallel to the dimention L *An optional type whose contact surfaces has been improved in point of absorptivity. *MT-SOFT type has no 0.5mm thickness. *Please consult with us for larger size than 50Lx: Shin-Etsu Inter-Connector has been registered in European Community,TM No. 000299016, and in the United States of America, TM No. 2078941.

DURABILITY OFFSET TO CONNECTING ELECTRODE (mQ) PRESSURE WELDING DURABILITY Thickness:0.5mm Compressed with 0.5mm pin by 0.3 , o oooooooooooooooo oooo o oooooooooooooooo oooo o oooooooooooooooo oooo Since metal filaments are inclined in the direction parallel to L dim., upper and lower connecting electrodes need “off^t”. measured by 4-terminal method The test method: the above-described drawing. Electrode : Size 0.4 mm x 0.4 mm gold Plated Electrode (50 patterns) Test Samples : 0.5 mm t (Offset 0.25 mm ) 1.0 mm t (Offset 0.5 mm ) 2.0 mm t (Offset 1.0 mm A frame is temporarily fixed with a connector....