Multifunctional Autosampler

Multifunctional Autosampler AOC-6000 Multifunctional Autosampler Dramatically Improves GC/MS Analysis Productivity

Automatic Switching Between Three GC/MS Sample Injection Modes The AOC-6000 is capable of exchanging syringe modules automatically. Simply choose between liquid injection, headspace (HS) injection, or solid-phase microextraction (SPME) injection. The AOC will pick the appropriate syringe module and perform the sample introduction. Simple to Operate from GCMSsolution The AOC-6000 is controlled by GCMSsolution software. All parameters related to sample introduction are clearly displayed, easy to set and stored within the GCMS method. Specific programming functions, such as “heat ahead”, can be...

Automatic Switching Between Three GC/MS Sample Injection Modes Choose between liquid injection, headspace (HS) injection, and solid-phase microextraction (SPME) injection. The sample injection method can be selected to suit the sample form and the components targeted for analysis. Liquid Injection Headspace Injection SPME Injection Analysis of Pesticides, VOC, and Mold Odor in Tap Water Using the AOC-6000 Automatic Switching of Sample Injection Methods The AOC-6000 automatically exchanges the syringe tools installed in the park station for each sample injection method (automatic tool exchange...

Simple to Operate from GCMSsolution AOC-6000 parameter settings and control are managed in GCMSsolution*2 software. Analysis accuracy control is easy since the AOC-6000 and GC/MS analysis conditions are stored with the measured data. GC/MS and the AOC-6000 are controlled from the same software, simplifying method selection and analysis conditions settings. AOC-6000 analysis conditions are stored in the measurement data file. AOC-6000 method files (for liquid, HS, and SPME injections) are preconfigured with typical analysis conditions. Injection volume and other parameters that need to be changed...

Automated Pretreatment Maximizes Analysis Efficiency The AOC-6000 automatic syringe exchange (10 uL to 1000 uL) and mixing functions automate the preparation of calibratio curve samples, addition of internal standard substances, and sample dilution. This heightens the efficiency of complicated sample preparation. Two method files are provided to facilitate sample preparation: one for automatic addition of internal standard, and the other for automatic creation of calibration curve samples. These method files can be used immediately just by changing some parameters. Reagent Preparation Method...

Continuous Analysis Using the Reagent Preparation Function Reagent preparation and sample analysis can be performed continuously using the reagent preparation method file. Internal Standard Curve: Quadratic Weighting Method: None Residual Pesticides in Foods Sample Pretreatment Calibration Curve Samples Sample Analysis Vlultifunctional Autosampler

Lineup Three AOC-6000 models are available. Select the model to suit your type of analysis. Model Liquid Injection SPME Injection Automatic Tool Exchange Reagent Mixing Entry model Standard model High-end model Specifications Entry model Size of the main unit Standard model High end model Number of vials Liquid injection 60 10 mL / 20 mL vials per tray (Up to two trays can be mounted) 1 μL to 10 μL (using a standard 10 uL syringe) Repeated injection 1 cycle to 99 cycles / vial Headspace injection volume HS injection Liquid injection volume 250 uL to 2500 μL (using a standard 2.5 mL syringe) Syringe...