TD-30 Series
12Pages

Thermal Desorption Systems

Thermal Desorption System Revolutionary Thermal Desorption System Provides Excellent Processing Ability and Reliability The TD-30 was developed as the optimal solution for gas and materials analysis. Its outstanding processing ability and excellent expandability provide strong support for all types of analysis, from work in research departments to quality control. Outstanding Processing Ability and Basic Functionality ► Extensive sample capacity capable of accommodating 120 samples ► Efficient analysis with the overlap function and interrupt function ► High-sensitivity analysis of high...

Outstanding Processing Ability and Basic Functionality Extensive Sample Capacity Capable of Accommodating 120 Samples The TD-30R has a maximum capacity of 120 samples, which allows processing a large number of samples via consecutive analyses overnight and on weekends. In addition, the sample tray is positioned lower down on the front of the instrument. This makes it easy to access even during analysis, and prevents tube positioning errors. TD-30R Efficient Analysis with the Overlap Function and Interrupt Function With the TD-30 series, the overlap function enables the next sample to be...

Excellent Expandability Enables a Variety of Analyses Hedging Risks with the Retrapping (Restore) Function With the retrapping (restore) function, split samples desorbed from the tube and loaded into the GC-MS are once again trapped by the tube. Even if a problem occurs, the sample can be measured again, so that even precious trace samples can be analyzed with a sense of ease. In addition, with the TD-30R, the tube is cooled rapidly after desorption, so even low boiling point components can be restored. Sample tube Trap tube Column 2. Trap desorption Cooling Analysis after retrapping Split...

The TD-30 series can be optionally equipped with a barcode reader function. The barcode printed on the tube can be automatically read, and the tube and sample information recorded by the software. Furthermore, the conditions when the tube was analyzed can be easily checked. Pretreatment Result Browser Pressure and flow Leak check minimum Pressure: Leak check maximum Pressure: ISTD minimum Row: ISTD maximum Row: Tube desorb minimum Row: Tube desorb maximum Row: Temperature Tube Desorb temperature: Tube heating block temp, while restoring: Dry Purge temperature: Trap Desorb temperature: The...

Simple Operations and Ease of Maintenance Easy-to-Maintain, User-Friendly Design With the TD-30 series, traps, O-rings, and other consumables and maintenance parts can be accessed from the top surface of the instrument, so replacement is simple. The system is equipped with a software function that records the number of uses of consumables and maintenance parts, and notifies the user when a pre-specified number of uses has been reached. Accordingly, problems due to the operating life of parts can be avoided. Rotor Seal O-Ring O-rings can be replaced without using tools. Trap Tube Column...

Appropriate Measures When an Analysis Error Occurs (Skip Function) If a user forgets to place a sample in the tray, or a leak error is detected due to a defective product, it's possible to select whether to stop the consecutive analysis, or skip that step and continue. As a result, precious time is not wasted by simple mistakes. Simple, Easy-to-Operate Software The user interface of the control software for the TD-30 series has the same look and feel as the GC and GC-MS method and batch file settings windows. In addition, the operating method is easy to learn. Effective Instrument...

= Toxic Air Pollutants With time-consuming air sampling measurements, if analysis fails, re-measurement can be expensive. The risk of analysis failures can be lowered by using the TD-30R restore and internal standard additive functions. = Working Environment With its wide dynamic range, a TD-GC-FID system has a low running cost, and can measure many components simultaneously.

Diffused Gases The TD-30 series, which features a short transfer line with no cold points, is optimal for SVOC measurements. With its low background noise, it can accommodate trace analysis, including measurements of diffused gases using a chamber, and measurements of the air inside a clean room. Simultaneous Analysis of SVOC Standard Samples Thermal Extraction With VDA 278, the diffused gas measurement method for automotive parts, the tube is filled with the specimen, and then heated to 100 °C before the VOCs are measured. Afterwards, the sample is removed, the tube is heated to 280 °C,...

Fragrant Components in Foods The sample tray of the TD-30 series, in which the tubes are oriented horizontally, enables the placement of not only solid materials but also soft materials and viscous materials, making it Anis ketone Hydroxil methyl furfural Anis aldehyde p-Allyl anisole Acetic acid suitable for the analysis of foods. Fragrant Components in Fennel Seeds Foul Odors from Products Highly repeatable carrier gas control due to an advanced flow controller (AFC) enables the qualitative analysis and semi-quantitative analysis of unknown peaks in combination with a retention index...

Tube Size TD-30 Series Thermal Desorption Systems

GCMS-TQ™ and GCMS-QP™ are trademarks of Shimadzu Corporation. SilcoNert® is a registered trademark of SilcoTek Corporation. TENAX™ is a trademark of BUCHEM B.V. Carbopack™ is a trademark of Sigma-Aldrich Co. LLC. Carbosieve® and Carboxen® are registered trademarks of Sigma-Aldrich Co. LLC. Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. For Research Use Only. Not for use in diagnostic procedures. This publication may contain references to products that are not available in your country. Please...