Shihlin AC Drives SA3 High Performance Vector Control AC Drive 220V Series 0.75KW75KW 440V Series 0.75KW315KW Head Office: 16F,No.88, Sec.6,ChungShan N.Rd., Taipei, Taiwan,111 TEL:+886-2-2834-2662 Suzhou Factory(China): 88,Guangdong St.,New District,Suzhou,Jiangsu,China,215129 TEL:+86-512-6843-2662 Ofcial website www.seec.com.tw Automation Division website www.seecfa.com [email protected] Specication in this catalog are subject to change without notice for ongoing product modication and improvements. © 2015 Shihlin Electric & Engineering Corporation. All rights reserved.

Product Range Product Features Wiring Diagram Optional Accessories

Product Range Reverse torque Factory Automat

SA3 Product Features Temporary Compensation at Low Voltage Magnetic Flux Brake ‧During temporary power disruptions, output frequency can be controlled in order to maintain the DC bus voltage of the AC drive to control motor deceleration or stoppage. ‧When power is restored, the AC drive will carry out re-acceleration to attain the frequency prior to power stoppage . ‧May be applied to equipment that are not permitted to operate when idle. ‧When the motor is stopping, the magnetic flux will be transmitted to the motor coil to shorten deceleration time without relying on regenerative resistance....

Product Features High Performance Synchronous Motor Control Technology ■ Supports induction motor (IM) and synchronous motor (IPM and SPM) control. ■ Supports open loop synchronous motor control. Synchronous motor (IPMJ ■ Supports 2 display styles. ■ Able to simultaneously displaying 6 sets of operational data. ■ Offers both English and Chinese language interfaces. ■ Capable of storing 3 sets of parameters. ■ Supports shuttle settings. _ . , . . . rr s English display interface display Interface Isolated air Channel Designs ■ Fan wind channels are sealed and isolated from the heat dissipation...

Product Features ■ Includes 10 sets of multi-functional combinational logic input terminals (with high-speed pulse inputs *1). ■ Includes 5 sets of multi-functional combinational output terminals (including electric relay output *2, transistor output *2, and high-speed pulse output *1). ■ Includes 3 sets of analog input signals (with -10~+10V*1 and 4~20mA/0~10V*2). ■ Includes 2 sets of analog output signals (0~20mA/0~10V*2). ■ Provides PLC programming software for easy editing program. ■ Applicable for programming for small number of point sand capable of supporting multiple functions. 12 Sets...

Electrical Specifications Note: The test conditions of rated output current, rated output capacity and AC Drive power consumption are: the carrier frequency (P.72) is at the set value; the AC Drive output voltage is at 440V; the output frequency is at 60Hz, and the ambient Factory Automation

Electrical Specifications Note : The test conditions of rated output current, rated output capacity and AC Drive power consumption are: the carrier frequency (P.72) is at the set value; the AC Drive output voltage is at 440V; the output frequency is at 60Hz, and the

Blue text indicate AC drive parameters. For details, please refer to the SA3 instruction manual Factory Automation

SA3 Wiring Diagram Main circuit terminal Control circuit terminal NFB/MCCB Three Phase AC Power supply Brake unit Note 3 MOTOR Note 2 Note 1 Main loop Control loop SINK Control input signals (No voltage input allowed) Run Reverse Alarm clear Relay output Green light Multi-speed 4 Green light Multi-speed 6 High speed pulse input Multi-function output High-speed pulse output Analog signal input / output DC1224V 1KΩ 2W above Analog meter Communication expansion board NOTE 1. Please refer to the Section 5.4.1 for the applications of external thermal overload relay. 2. Make sure that 10, -10, SD,...

Model type (mm) (mm) (mm) farri) (mm) (mm) (mm) (mm) Factory Automation

Optional Accessories PROFIBUS communication expansion board Factory Automation

Speed feedback board (supports open collector type output) Common Accessories Data transmission cable SS-CBL01/03/05T AC/DC reactor communication converter

Shihlin AC Drives SA3 High Performance Vector Control AC Drive 220V Series 0.75KW75KW 440V Series 0.75KW315KW Head Office: 16F,No.88, Sec.6,ChungShan N.Rd., Taipei, Taiwan,111 TEL:+886-2-2834-2662 Suzhou Factory(China): 88,Guangdong St.,New District,Suzhou,Jiangsu,China,215129 TEL:+86-512-6843-2662 Ofcial website www.seec.com.tw Automation Division website www.seecfa.com [email protected] Specication in this catalog are subject to change without notice for ongoing product modication and improvements. © 2015 Shihlin Electric & Engineering Corporation. All rights reserved.