- Catalogs
- Shibaura Machine
- ED1300, ED1800
- Products
- Catalogs
- News & Trends
- Exhibitions
ED1300, ED1800
1 / 1 PageView full catalog
ED1300, ED1800
Product catalog summary
Major Specifications
- Dimensions and Capacities: The document provides specifications for two units, A and B, with measurements in millimeters (mm) and grams (g). Key dimensions include a width of 115-125 mm and a height of 125-140 mm. The plasticizing capacity is noted as 520-690 kg/h.
- Pressure and Force: The maximum injection pressure is specified in MPa and kgf/cm², with values ranging from 143-180 MPa and 1460-1830 kgf/cm². Clamping force is measured in kN.
- Machine Dimensions: The machine dimensions include length (L) of 11.6-11.7 meters, width (W) of 3.7 meters, and height (H) of 3.3 meters.
- Additional Notes: Specifications are subject to change due to continuous improvements. The maximum injection and holding pressures are dependent on molding conditions and are not indicative of resin pressure.
Machine Dimensions
- Distance Between Tie Rods: Horizontal and vertical distances are specified as 1415×1415 mm and 1800×1500 mm.
- Screw Diameter: The screw diameter is listed as 3.0-3.5 mm.
- Open Daylight (Max.): The maximum open daylight is 3200 mm.
- Injection Unit and Barrel Codes: Codes such as i120, ED1300, and ED1800 are used to identify specific components.
See more
Catalog excerpts
Major Specifications ITEM Injection Unit Code Barrel Code Screw Diameter Shot Weight Injection Speed Clamping Force Distance Between Tie Rods (H×V) Clamp Stroke Machine Dimensions Note 1. Due to continuous improvements, specifications are subject to change without notice. 2. Max. injection pressure and max.holding pressure are power of injection unit, not resin pressure. Max. injection pressure and Max. holding pressure are limited according to molding conditions. 3. 1MPa=10.2kgf/㎝², 1kN=102kgf
Open the catalog to page 1All Shibaura Machine catalogs and technical brochures
TMD series10 Pages
KWA series3 Pages
IS series1 Page
ED series1 Page
Integrated Report 202445 Pages
Archived catalogs
SCARA Robot THL Series20 Pages
EC-P Ultra1 Page
IS-GS1 Page
IS-GT1 Page
IS DG DF1 Page
EC51 Page
ED 650 8501 Page
EC5P1 Page
EC-NII1 Page
EC 302 Pages
ED25001 Page
EC 450-1800sx3 Pages
EC 50-350s3 Pages
BTD-100.R128 Pages
Related Searches
- CNC machining center
- Turning center
- Vertical CNC milling center
- Industrial robot
- CNC turning machine
- Grinding machine
- 3-axis CNC milling center
- Articulated robot
- 2-axis turning machine
- 6-axis robot
- Precision CNC milling center
- 5-axis CNC milling center
- CNC grinding machine
- Handling robot
- Injection moulding machine
- Extrusion line
- Thermoplastic extrusion line
- Precision grinding machine
- High-precision CNC milling center
- Rigid CNC milling center
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.