Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. SHERPA MOBILE ROBOTICS
  3. SHERPA-P

SHERPA-P

SHERPA-P
1 / 2 PagesView full catalog

SHERPA-P

Product catalog summary
Technical Specifications
  • Payload Capacity: Single tray and pallet lift options available, with a payload of 1050Kg and 1000Kg respectively.
  • Weight: Robot and equipment weigh 200Kg for single tray and 250Kg for pallet lift.
  • Total Rolling Weight: 1250Kg for both configurations.
  • Operating Modes: Autonomous with fleet management capabilities.
  • Driving Directions: Capable of moving both ways.
  • Control Panel: Features buttons and an optional 7-inch touchscreen interface.
  • Color Options: White (RAL 9016) and Grey (RAL 7044).
  • Dimensions: 1354 x 940 x 310 mm.
  • Floor Clearance: 20 mm.
  • Maximum Slope: 5%.
Performance
  • Maximum Speed: 1.6m/s or 5.8 km/h, depending on load.
  • Autonomy: Induction charging allows for 24/7 operation.
  • Traction Motors: Two motors with 876 W each.
  • Turning Radius: 0 mm, allowing the robot to turn on itself.
  • Positioning Accuracy: +/- 10 mm along the axis of motion, +/- 20 mm perpendicular.
Environment
  • Protection Class: IP 20.
  • Operating Environment: Indoor use on smooth and clean floors.
  • Operating Temperature: 5 to 50°C, with humidity from 10 to 90% non-condensing.
Communication and Signalling
  • Wifi: Dual-band wireless capability.
  • Interface: USB for updates and Ethernet Modbus protocol.
  • Visual Signalling: Four multicoloured LED strips and two Bluespot indicators.
  • Sound Signalling: Equipped with a loudspeaker.
Safety and Compliance
  • Standard Compliance: CE compliance according to NF EN ISO 3691-4.
  • Performance Level: PL d (EN ISO 13849).
  • Avoidance and Positioning Sensors: Nanoscan Sick with a detection height of 135 mm and a protective field scope of 3 m.
  • Laser Type: Class 1 with a scanning angle of 2 x 270°.
  • Braking System: Dynamic emergency braking and parking braking by loss of power.
Pallet Lift Specifications
  • Lifting Time: 5 seconds.
  • Stroke: 50 mm.
  • Type of Pallet: Europallet 1200x800 mm (EN13698-1).
  • Safety Features: Housing against finger entrapment, fall prevention system, and pallet presence sensor.
See more

Catalog excerpts

SHERPA-P-1

Your Move to Smart Mobility Datasheet SHERPA-P SHERPA® : SMART & MOBILE COLLABORATIVE ROBOTS Pallet Support Pallet lift Single tray Requires floor fixing Technical specifications Payload capacity Single tray Pallet lift Weight of the robot and its equipment (including batteries) Total rolling weight Operating modes Autonomous + fleet management Driving directions Both ways Buttons + 7» touchscreen interface (optional) White «trafic» / RAL 9016 - Grey / RAL 7044 Floor clearance Maximum slope Maximum step

 Open the catalog to page 1
SHERPA-P-2

Performances Maximum speed Power of traction motors Turning radius (around the robot’s center) Positioning accuracy (in docking phase) +/- 10 mm in the axis of motion +/- 20 mm perpendicular to the axis of motion Environment Protection class Operating environment Indoor (smooth and clean floor) Operating temperature From 5 à 50°C (humidity from 10 to 90 % non-condensing) Communication et signalling Wifi Dual-band wireless (see datasheet) USB (for updates) / Ethernet Modbus protocol Visuel signalling 4 multicoloured identification LED strips and 2 Bluespot Sound signalling 360° safety around the...

 Open the catalog to page 2

All SHERPA MOBILE ROBOTICS catalogs and technical brochures

  1. SHERPA-D
    SHERPA-D

    2  Pages

  2. MOBILE AUTONOMOUS ROBOTS
    MOBILE AUTONOMOUS ROBOTS

    5  Pages

  3. SHERPA-P Autonomous mobile robots - transport of pallets
    SHERPA-P Autonomous mobile robots - transport of pallets

    4  Pages

  4. Sherpa -b
    Sherpa -b

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.