Sherborne Sensors DC-Operated, Gravity Referenced Servo Inclinometer The T935 series is the next evolution of our popular and field proven T435 series. As high precision closed loop gravity referenced servo inclinometer, it is designed for use where overall space is limited. The unit can be stacked to provide dual axis x and y measurements. Models are available in a wide variety of angle ranges. Solder pin terminations are T935 series inclinometers carry the tradition of a long and successful market history for servo inclinometers marketed under the Schaevitz® brand. This exceptional product performance and reliability is now combined with the added benefits of extensive applications engineering support, global technical sales presence, repair, refurbishment and calibration services, and a vendor stocking program. □ Bore Hole Mapping □ Structural Health Monitoring □ Continuous Casting Mold Alignment Railway Maintenance Equipment □ Mobile and Stationary Antenna Aiming □ Fully self contained and compact - connect to a DC power source and a readout or control device for a complete operating system □ Extremely rugged, fluid filled, □ Extended pins with chamfered housing edge for ease of soldering □ Laser marked part and serial number □ Industry Exclusive 2 Year Warranty In North America call toll free: ■ (877) 486-1766 Email: [email protected] Email: [email protected] ■ website: www.sherbornesensors.com

JJ_Full Range Output is defined as the full angular excursion from positive to negative, i.e. ±90° = 180' 2. Non-linearity is determined by the method of least squares. 3. Cross axis sensitivity is the output of the unit when tilted to full range angle in cross axis 4. Zero offset is specified under static conditions with no vibration inputs T935-14.5 is a standard T935 series sensor with a range of ±14.5 degrees Tapped holes permit Piggyback mounting SENSITIVE AXIS I.:.'". !n Nortn America call toll free: ■ (877) 486-1766 ■ Fax (201) 847-1394 . ShlGrbOrnS SGIlSOrS Email: [email protected]...