• Compact dual axis (x and y) inclinometer with fully conditioned axes.
• Offers ranges from ±1° to ±90° with total electrical isolation between axes.
• High accuracy with input voltage of ±15 VDC and output signal of ±5 VDC.
• Includes self-test functionality on both axes and features silicone oil and electrical damping.

• Ideal for high accuracy levelling systems, oil platform levelling, satellite antenna platform levelling, and other industrial applications requiring 2-axis levelling.

The T233 and T235 models are high precision, gravity-referenced servo inclinometers suitable for military and industrial applications. They eliminate alignment issues found in single-axis units by using precision housing with accurately positioned dowel holes.

• Operating temperature range: -18°C to 70°C.
• Survival temperature range: -40°C to 70°C.
• Can withstand constant acceleration overload of 50g and shock survival of 1250g, 0.5msec, ½ sine.
• Vibration endurance of 35g rms from 20 Hz to 2000 Hz sinusoidal.
• Environmental sealing rated at IP65.

• Excitation voltage: ±12 to ±18 Volts DC.
• Current consumption varies by range, with a nominal value of ±15 to ±25 mA.
• Full Range Output (FRO) is ±5 Volts DC.
• Output standardization is within ±1% FRO.
• Output impedance is less than 10 Ohms, with a maximum output noise of 0.005 V rms.
• Non-linearity and non-repeatability specifications vary by range, with maximum values of 0.05% and 0.04% FRO respectively.
• Resolution ranges from 0.1 to 4.0 arc seconds, depending on the range.
• Sensitive axis-to-case misalignment and cross-axis sensitivity are specified with maximum values of ±1.0 degrees and 0.2% FRO respectively.
• Zero offset and thermal shifts are specified under static conditions with no vibration inputs.

Specify the model type with the appropriate range, e.g., T233-0001-30 for a Two Axis Inclinometer with a range of ±30°, fitted with a 12-way receptacle. Mating Connector 3CON-037F can be specified if required.