Voltage: customizable No-load Speed: customizable Rated Load: customizable No-load Current: customizable Operating Temperature: customizable Noise: lower than 42dB under stable circumstance Product Description: servo motor for model airplane is designed and developed for designated customers. Below is only the showcase. Besides selling standard products, ZHAOWEI can provide design, research and manufacture for customers based on their specific needs as well. Features: • Fit for ALL kind of R/C Toys • Structural Material: Aluminum metal teeth, coreless motor, double ball bearing • Scope: small and medium-sized electric model aircraft and model. • 3 pole wire Product Name: Servo Motor for Model Airplane Product Description: Servos works well in the range of 4V-7V. The signal is supposed to be at TTL levels. Usually, servos are run near 5V, for both power and signal high. The design principle is that the planetary gearheads module drives the rudder plate to rotate. The control circuit board receives the control signal from the

signal line and controls the rotation of the motor. The motor drives a series of gear sets to decelerate and transmit to the rudder plate. The output shaft of the servo motor is connected to the position feedback potentiometer. The position feedback potentiometer is driven while the rudder plate rotates. The potentiometer will output a voltage signal to the control circuit board for feedback, and then the control circuit board will determine the rotating direction and speed of the motor according to the position, thus stopping the target. When the aircraft model needs to tilt, the servo motor...