• Material: Available in plastic or metal.
• Rated Voltage: Operates between 3-24V.
• No-load Speed: Ranges from 4 to 1373 rpm.
• No-load Current: Between 86-110mA.
• Rated Load Speed: 3-1125 rpm.
• Rated Load Current: 130-150mA.

• Outer Diameter: 16mm.
• Material: Plastic/Metal.
• Direction of Rotation: Clockwise and counterclockwise.
• Gear Backlash: ≤3°.
• Bearing Types: Porous and rolling bearings.
• Axial Endplay: ≤0.1mm.
• Radial Loading on Output Shaft: ≤20N for porous, ≤30N for rolling bearings.
• Operating Temperature Range: -30 to +100℃.
• Gearbox Stages and Reduction Ratios: 1 stage (4/6), 2 stages (16/24/36), 3 stages (64/96/144/216), 4 stages (256/384/576/864/1296).
• Max Rated Torque: 290-490 mN.m across all stages.
• Max Instant Torque: 588-980 mN.m across all stages.
• Gearbox Efficiency: Varies from 58-90% depending on stages.
• Length: Varies from 11.5mm to 21.4mm depending on stages.

• Motor Types: Brush DC motor, stepper motor, coreless motor.
• Voltage: 3-24V.
• Input Speed: ≤15000 rpm.
• Current: Maximum 300mA.

• Automobile: Panoramic sliding sunroof, EV charging station.
• Smart Home: Smart lifting table, electric curtain.
• Intelligent Robot: Robot joint, intelligent escort robot, robot eye system, automatic feeder, building block drive system.
• Consumer Electronics: All-screen phone camera, electric rotating camera for phone, intelligent portable photo printer for mobile phone, smart bike lock, automatic hair curler, e-cigarette cleaning part, vending machine, electric screwdriver.
• Communication Technology: Base station antenna.
• Medical Technology: Surgical stapling device.
• Personal Care: Fascia gun, electric foot grinder, treadmill pedal, water replenishing instrument, facial pore cleanser, face cleanser.

• Motors: Brush DC motor, Brushless DC motor, stepper motor.
• Planetary Gears: Material options include plastic gear, powder metallurgy, hardware processing; Gear shapes include helical and spur gears.
• Sun Gear: Material options include plastic gear, powder metallurgy, hardware processing; Gear shapes include helical and spur gears.
• Gearbox Stages: Single stage, 2-stage, 3-stage, 4-stage.
• Metal Shaft: D-type, circular, double flat, hexagon, pentagon, square.
• Output Shaft: D-type, circular, double flat, knurling.
• Bearing: Porous bearing, rolling bearing.
• Housing: Metal, plastic.

The head-up display rotating base is designed to project important information onto a holographic half mirror on the windshield, enhancing driver safety by allowing them to view information without looking down. The gear commutator enables two transmission routes, allowing for forward and reverse gear rotation, thus correcting display angles and preventing gear damage from excessive load.