*mydirectindustry

YX10148A

Product catalog summary

General Information
The document provides specifications for the TFT-LCD module YX10148ACT by Shenzhen Yousee Technology Co., Ltd. It features a 10.1-inch display with a resolution of 1200(RGB) x 1920 dots, utilizing a MIPI interface and a white LED backlight, supporting all viewing directions.

Module Outline Drawing
Details include dimensions and structural information, highlighting the GFF structure and a surface hardness of ≥6H. The module can withstand a drop test with a 64g steel ball from a height of 40cm.

Interface Description
The interface includes power supply pins, LED connections, reset signals, and MIPI data lanes. It also describes the touch panel interface using I2C communication.

Absolute Maximum Ratings
Maximum ratings include a supply voltage, operating temperature range of -20 to +70°C, and storage temperature range of -30 to +80°C.

Electrical Characteristics
Operating voltages are 3.3V for analog and 1.8V for logic, with a total power consumption of up to 6W.

Backlight Characteristics
The backlight system consists of 80 LEDs in a series-parallel configuration, with a forward voltage of approximately 21.638V and a lifespan of 20,000 hours.

Optical Characteristics
The module offers a response time of 25-30ms, a contrast ratio of 1000, and a brightness of 1000 cd/m², with an 80-degree viewing angle in all directions.

Recommended Operating Sequence
Power on/off sequences are provided, with further details in the IC specification.

Production Process Control
A detailed workflow for production is outlined, including quality checks and handling of nonconforming products.

Inspection Specifications
Criteria for defects such as point defects, line defects, and edge damage are specified, with allowable limits.

Reliability Test Conditions
Tests include high-temperature storage at 80°C for 48 hours, with post-test inspections for defects like air bubbles and seal leaks.

Specifications and Testing Procedures

Glass Crack and Current IDD: Issues such as glass cracking and current IDD being twice the initial value are noted.
Temperature Tests: Include low temperature storage at -30℃ for 48 hours, high temperature operation at 70℃ for 48 hours, and low temperature operation at -20℃ for 48 hours. A temperature cycle test involves cycling between -20℃, 25℃, and 70℃ for 10 cycles.
Damp Proof Test: Conducted at 55℃ with 90% relative humidity for 48 hours.
ESD Test: Involves air discharge on 9 points with a voltage of ±8KV, checking functionality after each cycle.

Precautions for Using LCD Modules

Handling Precautions: The display panel is fragile and should be handled carefully to avoid mechanical shock.
Polarizer Care: Avoid contact with hard objects and ensure proper temperature acclimatization after low-temperature tests.
Assembly Tools: Tools like soldering irons must be grounded to prevent electromagnetic interference.

Handling and Storage Guidelines

Correct Handling: Use anti-static gloves and handle modules by the edges.
Incorrect Handling: Avoid stacking modules and using sharp objects.
Power Sequence: Apply logic voltage before analog voltage during power on, and reverse the sequence during power off.
Storage Conditions: Store in sealed polyethylene bags in a dark place, maintaining temperature between 0~35℃ and humidity between 40%~60% RH.

Transportation Precautions
Handle with care during shipment, ensuring packaging integrity and avoiding exposure to water.

Packing Specification
Dimensions: 370*300*150

Special Remarks

Specifications serve as the quality inspection criteria for Yousee Technology.
Customers should report any issues or disagreements regarding specifications promptly.
Yousee is not liable for damages due to neglect of specified precautions.
Limited warranty covers functional defects for one year from the shipment date, unless otherwise agreed.

Catalog excerpts

深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) YX10148ACT Customer : (客户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查电子结构深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected] Adress:深

Open the catalog to page 1

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Open the catalog to page 2

Shenzhen Yousee Technology Co., Ltd Product Specification CONTENTS 目录 1.GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 基本描述 2 .MODULE OUTLINE DRAWIN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5 产品外形图 3.INTERFACE DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 接口定义 4.ABSOLUTE MAXIMUM RATINGS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 极限参数 (IC) 5.ELECTRICAL CHARACTERISTICS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 模块电气特性 6.BACKLIGHT...

Open the catalog to page 3

Shenzhen Yousee Technology Co., Ltd Product Specification 1. GENERAL INFORMATION 基本描述 Contents 内容 TFT-LCD /TRANSMISSIVE Module size 模组尺寸 Number of Dots 点阵 Outline dimensions 外形尺寸 Active area 有效区域 Pixel pitch 像素 MIPI interface Viewing direction 视角方向 Backlight type 背光类型 LCD Driver IC LCD 驱动 IC Interface type 接口类

Open the catalog to page 4

Version: First Edition Product Specification Shenzhen Yousee Technology Co., Ltd

Open the catalog to page 6

Shenzhen Yousee Technology Co., Ltd Product Specification 3. INTERFACE DESCRIPTION ^P^^ Version: First Edition

Open the catalog to page 7

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Open the catalog to page 8

Shenzhen Yousee Technology Co., Ltd Product Specification 4. ABSOLUTE MAXIMUM RATINGS Version: First Edition

Open the catalog to page 9

Shenzhen Yousee Technology Co., Ltd Product Specification 6. BACKLIGHT CHARACTERISTICS 背光电气特性 Item 项目 Forward voltage 正向电压 Connection mode 连接类型 7. OPTICAL CHAYACTERISTICS 光学特性 Item Response time 响应时间 Contrast ratio Color gamut range 视角范围 LCM brightness

Open the catalog to page 10

Shenzhen Yousee Technology Co., Ltd Product Specification 296 G Note1.Response time is the time required for the display to transition from White to black(Rise Time,Tr)and from black to white(Decay Time,Tf).For additional information see FIG1... 总成重量备注 1.响应时间是 Tr(上升时间）与 Tf(下降时间）的和，Tr 指显示黑色画面转为显示白色画面需要时间，Tf 指显示白色画面转为显示黑色画面需要时间，详见 FIG1.。 FIG1. The definition of Response time 响应时间定义 Note2.contrast Ratio(CR) is defined mathematically by the following formula ,For more information see FIG2. Contrast Ratio(CR)=Average Surface Luminance with all white pixels/ Average Surface Luminance with all black...

Open the catalog to page 11

Shenzhen Yousee Technology Co., Ltd Product Specification Note4.Viewing angle is the angel at which contrast ratio is greater than a specific value.For TET module,the specific value of contrast ratio is 10.For monochrome and color stn module,the specific value of contrast ratio is2.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface.For more information see FIG3 备注 4.视角指对比度大于等于一个特定值时的可视范围，对 TFT 屏，对比对特定值为 10，对黑白屏 CSTN 屏，对比度特定值为 2，视角由横轴（X 轴），竖轴（Y 轴）同 Z 轴（垂直与 LCD 表面）之间的夹角来定义，详见 FIG3.。 FIG3 The definition...

Open the catalog to page 12

Shenzhen Yousee Technology Co., Ltd Product Specification 8. Recommended Operating Sequence 8.1 Power on/off sequence with 2- power NOTE: This section is only for reference,Details please refer to the IC specification. Version: First Edition

Open the catalog to page 13

Shenzhen Yousee Technology Co., Ltd Product Specification DS1 Video mode setting: (pulse mode porch setting) NOTE: This section is only for reference,Details please refer to the IC specification. Version: First Edition

Open the catalog to page 14

Shenzhen Yousee Technology Co., Ltd Product Specification 10. Production process control 生产过程控制管理 WORKFLOW CHART 工作流程图 Responsibility accounting 权责单位 Flow Chart 流程图 Production design 生产计划排程 Production arrangements 生产准备 First article production 首件生产 First article assurance 首件确认 Process Inspection 制程检验 Product Material Control 生产计划与物料控制 Production department 生产部 Production department 生产部 Quality department 品质部 Production department or Quality department 生产部/品质部 Quality department 品质部 Production department 生产部 Production department or Quality department 生产部/品质部 Production department or storage...

Open the catalog to page 15

Shenzhen Yousee Technology Co., Ltd Product Specification 11. INSPECTION SPECIFICATIONS 品质检验标准不良项目

Open the catalog to page 16

Shenzhen Yousee Technology Co., Ltd Product Specification

Open the catalog to page 17

Shenzhen Yousee Technology Co., Ltd Product Specification 12. RELIABILITY TEST CONDITIONS NO. Version: First Edition

Open the catalog to page 18

Shenzhen Yousee Technology Co., Ltd Product Specification 13. PRECAUTIONS FOR USING LCD MODULES 模组使用注意事项 1. Handing precautions 使用注意事项 1.1 The display panel is made of glass and polarizer.As glass is fragile.It tends to become or chipped during handing especially on the edges.Please avoid dropping or jarring.Do not subject it to a mechanical shock by dropping it or impact. 显示屏由玻璃和偏光片组成，由于玻璃是脆的，使用过程中要特别注意边缘区，请防止跌落或震动，不能机械碰撞。 1.2 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.Do not touch the display with bare hands,This will...

Open the catalog to page 19

Shenzhen Yousee Technology Co., Ltd Product Specification As above picture,Please handle with anti-static glovers around LCM edges. 像上面的图片，请戴防静电手套，并拿模块边缘。 2.3 Incorrect handing 错误操作 Please don't stack LCM Please don't operate with sharp stick such as pens 2.4 Input logic voltage before apply analog high voltage such as LCD driving voltage when power on.Remove analog high voltage before logic when power off the module.Input each signal after the positive/negative voltage becomes stable. 开机时，先开逻辑电压，再接通模拟电压，如显示屏驱动电压。关机时，先断开模拟电压，再关逻辑电压，正负电源都稳定后再送控制信号。 2.5 If the LCD modules have been operating for...

Open the catalog to page 20

Shenzhen Yousee Technology Co., Ltd Product Specification 3.2 Store them in sealed polyethylene bag.If properly sealed,there is no need for the desiccant 使用聚乙烯密袋封，如果密封得当，不需要干燥剂。 3.3 Store them in a dark place.Do not expose to sunlight or fluorescent light,keep the temperature between0~35℃,and keep the relative humidity between40％RH and 40％RH. 避光保存，避免直接暴晒在太阳光或黄光灯下，保持温度在 0~35℃之间，保持相对湿度在 40％ RH 和 60％RH 之间。 3.4 The polarizer surface should not come in contact with any other objects(We advise you store them in the anti-static electricity container in which they were shipped) 偏光片表面避免接触其他物质（建议存放在货运防静电包装中...

Open the catalog to page 21

YX10148A

YX10148A

Catalog excerpts

All Shenzhen Yousee Technology Co., Ltd. catalogs and technical brochures