深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) Customer : (客 户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核 备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查 电 子 结 构 深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected] Adress:深

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX68001A Version: First Edition YX-RD-001-A Page 2 of 22

Shenzhen Yousee Technology Co., Ltd Product Specification CONTENTS 目录 1.GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 基本描述 2 .MODULE OUTLINE DRAWIN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5 产品外形图 3.INTERFACE DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 接口定义 4.ABSOLUTE MAXIMUM RATINGS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 极限参数 (IC) 5.ELECTRICAL CHARACTERISTICS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 模块电气特性 6.BACKLIGHT...

Shenzhen Yousee Technology Co., Ltd Product Specification 1. GENERAL INFORMATION 基本描述 Contents 内容 TFT-LCD /TRANSMISSIVE Module size 模组尺寸 Number of Dots 点阵 Outline dimensions 外形尺寸 Active area 有效区域 Pixel pitch 像素 Viewing direction 视角方向 Backlight type 背光类型 LCD Driver IC LCD 驱动 IC Interface type 接口类型 Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX68001A Version: First Edition YX-RD-001-A Page 5 of 22

Shenzhen Yousee Technology Co., Ltd Product Specification LCM interface description 3. INTERFACE DESCRIPTION ^P^^ P/N: YX68001A Version: First Edition YX-RD-001-A Page 6 of 22

Shenzhen Yousee Technology Co., Ltd Product Specification System ground System ground 4. ABSOLUTE MAXIMUM RATINGS 极限参数(IC) Parameter 参数 Operating temperature 操作温度 Storage temperature 存储温度 Supply voltage for logic 逻辑电压 I/O Input voltage for analog circuit 输入模拟电压

Shenzhen Yousee Technology Co., Ltd Product Specification Analog operating voltage 模拟电压 Analog operating voltage 模拟电压 Analog operating voltage 模拟电压 Analog operating voltage 模拟电压 Logic operating voltage 逻辑电压 Analog operating voltage 模拟电压 6. BACKLIGHT CHARACTERISTICS 背光电气特性 Item 项目 Forward voltage 正向电压 Connection mode 连接类型 7. OPTICAL CHAYACTERISTICS 光学特性 Item

Shenzhen Yousee Technology Co., Ltd Product Specification range 视角范围 LCM brightness 亮度 Chromaticity 色度坐标 Note1.Response time is the time required for the display to transition from White to black(Rise Time,Tr)and from black to white(Decay Time,Tf).For additional information see FIG1... 备注 1.响应时间是 Tr(上升时间）与 Tf(下降时间）的和，Tr 指显示黑色画面转为显示白色画面需要时 间，Tf 指显示白色画面转为显示黑色画面需要时间，详见 FIG1.。 FIG1. The definition of Response time 响应时间定义 Note2.contrast Ratio(CR) is defined mathematically by the following formula ,For more information see FIG2. Contrast Ratio(CR)=Average Surface Luminance with all white pixels/ Average...

Shenzhen Yousee Technology Co., Ltd Product Specification Note4.Viewing angle is the angel at which contrast ratio is greater than a specific value.For TET module,the specific value of contrast ratio is 10.For monochrome and color stn module,the specific value of contrast ratio is2.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface.For more information see FIG3 备注 4.视角指对比度大于等于一个特定值时的可视范围，对 TFT 屏，对比对特定值为 10，对黑白屏 CSTN 屏，对比度特定值为 2，视角由横轴（X

Shenzhen Yousee Technology Co., Ltd Product Specification Note6.CIE(X,Y)chromaticity is the Center point value.For more information see FIG2. 备注 6.选择中心点，分别测试 X，Y 值，详见 FIG2.。 Note7.For Viewing angle and response time testing,the testing date is base on Autronic-Melchers's ConScope.Series instruments.For contrast ratio,Surface Luminance,Luminance uniformity and CIE,the testing date is base on CS-2000(BM-7/CA310) photo detector. 备注 7.视角和响应时间，测试数据基于 Autronil Melchers's Conoscope 系列测试仪器，而对比度，表面亮 度，均匀度 CIE 坐标，测试数据基于 CS-2000(BM-7/CA310)光学测试仪 。 Note8.For TN type TFT transmissive module,Gray scale reverse...

Shenzhen Yousee Technology Co., Ltd Product Specification 8.2 Power on/off sequence with 3- power P/N: YX68001A Version: First Edition YX-RD-001-A Page 12 of 22

Shenzhen Yousee Technology Co., Ltd Product Specification Input VDDI Tvdoi rise TRES PULSE MIPI Active NOTE: This section is only for reference,Details please refer to the IC specification. Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 9. RESET INPUT TIMING Table 47: Reset Timing 3. During the Resetting period, the display will be blanked (The display enters (he blanking sequence, which maximum time is 12Q ms, when Reset Starts in the Sleep Out mode. The display remains the blank state in the Sleep In mode.) and then return to Default condition for Hardware Reset. 4. Spike Rejection can also be applied during a valid reset pulse, as shown below: NOTE: This section is only for reference,Details please refer to the IC specification. P/N: YX68001A Version: First Edition...

Shenzhen Yousee Technology Co., Ltd Product Specification 10. Production process control 生产过程控制管理 WORKFLOW CHART 工作流程图 Responsibility accounting 权责单位 Flow Chart 流程图 Production design 生产计划排程 Production arrangements 生产准备 First article production 首件生产 First article assurance 首件确认 Process Inspection 制程检验 Product Material Control 生产计划与 物料控制 Production department 生产部 Production department 生产部 Quality department 品 质部 Production department or Quality department 生产部/品质 部 Quality department 品 质部 Production department 生 产部 Production department or Quality department 生产部/品 质部 Production department or storage...

Shenzhen Yousee Technology Co., Ltd Product Specification 11. INSPECTION SPECIFICATIONS 品质检验标准 不良项目

Shenzhen Yousee Technology Co., Ltd Product Specification CF ^RAmAERAJ^RBR. RWBR. MRBR (RRA»^E) Note;The rest of the test items according to our standards 12. RELIABILITY TEST CONDITIONS P/N: YX68001A Version: First Edition YX-RD-001-A Page 17 of 22

Shenzhen Yousee Technology Co., Ltd Low Temperature Storage 低温存储测试 Product Specification shall be free from defects:实 -30℃±2℃/48 hours 1.Air bubble in the LCD;模 块中有气泡 Temperature Cycle Damp Proof Test 防潮测试 higher than initial value. 电流 IDD 大于初始值的 两倍。 测试前对样品进行外观和功能测试， 采用空气放电，对 TP 进行单次放 电，9 个点每一点放电一次，每次间