␡ൣᐲᆷ䭑、ᢰᴹ䲀‫ޜ‬ਨ SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (ӗ૱රਧ) YX43022A Customer : (ᇒ ᡧ) APPROVED BY CUSTOMER ᇘᡭㆴ㖨ṅ Approved by Remark ᇗṮ ༽⌞ APPROVED BY YOUSEE ᆽ䭗ㆴ㖨ṅ Checked by Ỷḛ ⭥ ᆀ 㔃 ᶴ ␡ൣᐲᆷ䭑、ᢰᴹ䲀‫ޜ‬ਨ Shenzhen Yousee Technology Co.,Ltd 䛩䮯෾ LONG Tel:15818552076 E-mail: zouchangcheng@youseelcd

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Product Specification Shenzhen Yousee Technology Co., Ltd 1. GENERAL INFORMATION Version: First Edition

P/N: YX43022A Version: First Edition YX-RD-001 -A Page 5 of 21

* //A Shenzhen Yousee Technology Co., Ltd_Product Specification Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification «#rn(ic) 4. ABSOLUTE MAXIMUM RATINGS Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 6. BACKLIGHT CHARACTERISTICS Item Notel.Response time is the time required for the display to transition from White to black(Rise Time,Tr)and from black to white(Decay Time,Tf).For additional information see FIG1... Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification FIG1. The definition of Response time Note2.contrast Ratio(CR) is defined mathematically by the following formula ,For more information see FIG2. Contrast Ratio(CR)=Average Surface Luminance with all white pixels/ Average Surface Luminance with all black pixels FIG2. Measuring method for Contrast ratio,surface luminance,Luminance uniformity,CIE(X,Y) Note3.The uniformity in surface luminance(WHITE) is determined by measuring luminance at eath test position,and then dividing the maximum luminance of all white pixels by minimum luminance...

Shenzhen Yousee Technology Co., Ltd Product Specification Note5. Surface luminance is the LCD surface luminance with all white pixels,For more information see FIG2. Note6.CIE(X,Y)chromaticity is the Center point value.For more information see FIG2. Note7.For Viewing angle and response time testing,the testing date is base on Autronic-Melchers's ConScope.Series instruments.For contrast ratio,Surface Luminance,Luminance uniformity and CIE,the testing date is base on CS-2000(BM-7/CA310) photo detector. Autronil Melchers's Conoscope Note8.For TN type TFT transmissive module,Gray scale reverse occurs...

Shenzhen Yousee Technology Co., Ltd Product Specification 8. Recommended Operating Sequence 8.1 Power on/off sequence with 2- power Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 8.2 Power on/off sequence with 3- power MIPI Lanes NOTE: This section is only for reference,Details please refer to the IC specification. Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 9. RESET INPUT TIMING ~V Ej Display Status NuFrnal Operation V Ratting Figure 12fc Reset Timing Initial condilion iDl-IljuII fjr Hi".V rufeul'l Table 4/: Reset Timing 3. During the Resetting period, the display will be blanked (The display enters the blanking sequence, which maximum time is 12Q ms, when Reset Starts rathe Sleep Out mode. The display remains the blank state in the Sleep In mode.) and then return to Default condition for Hardware Reset. 4. Spike Rejection can also be applied during a va'id reset pulse, as shown below: NOTE:...

Shenzhen Yousee Technology Co., Ltd Product Specification 10. Production process control ^ WORKFLOW CHART Flow Chart Related Files Form used Production design Production arrangements (Production planning and control documents » Production department or Quality department Production department or Quality department Production department or storage ( Standard operation procedure) ( standard inspection procedure) « Corrective and Preventive control procedure) (Finished goods inspection procedure) ( Nonconforming Product Control Procedure) (Reprocessing management ) (Material handling management)...

Shenzhen Yousee Technology Co., Ltd Product Specification 11. INSPECTION SPECIFICATIONS Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification LCD Note;The rest of the test items according to our standards Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 13. PRECAUTIONS FOR USING UCD MODUUES 1. Handing precautions 1.1 The display panel is made of glass ana polarizer.As glass is fragile.lt tends to becor chipped during handing especially on the edges.Please avoid dropping or jarring.Do not subject it to a mechanical shock by dropping it or impact. 1.2 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.Do not touch the display with bare hands,This will stain the display area and degraded insulation between terminals(some...

Shenzhen Yousee Technology Co., Ltd Product Specification As above picture,Please handle with anti-static glovers around LCM edges. 2.4 Input logic voltage before apply analog high voltage such as LCD driving voltage when power on.Remove analog high voltage before logic when power off the module.Input each signal after the positive/negative voltage becomes stable. 2.5 If the LCD modules have been operating for a long time showing the same display pattens,the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear.A normal operating status can...

Shenzhen Yousee Technology Co., Ltd_Product Specification 4.2 The transportation process should pay attention to the waterproof and moisture-proof measures.Product can not be watering.Ethylene sealed bags can not be unsealed. Peai' pad each finished IPCS two pallets stacked cross 18C degrees layer, including Outer box:lF('S Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification 1. The above specifications are the binding criteria for Yousee Technology’s outgoing quality inspection. 2. The customer is kindly requested to inform Yousee Technology as soon as possible on any questions, remarks, and disagreements regarding these specifications. 3. Yousee is not responsible for damage to its products due to neglect of the precautions as described in the previous chapter. 4. About the limited warranty unless special agreement between Yousee and customer Yousee will replace or repair any of its products that are found...