深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) Customer : (客 户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核 备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查 电 子 结 构 深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected] Adress:深

Product Specification Shenzhen Yousee Technology Co., Ltd

Shenzhen Yousee Technology Co., Ltd Product Specification Document Revision History Change No.

Product Specification Shenzhen Yousee Technology Co., Ltd YX18522425217FA color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel and a driving circuit.This TFT LCD has a 18.5 (16:9) inch diagonally measured active display area with (1366 horizontal by 768 vertical pixel) resolution. 11.6(16:9 diagonal) inch configuration Image Reversion: UP/DOWN and LEFT/RIGHT ROHS design

Shenzhen Yousee Technology Co., Ltd Product Specification 2.0 Absolute Maximum Ratings2.1 Environment Absolute Rating Item Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (3) Test condition: LED Current 240 mA

Shenzhen Yousee Technology Co., Ltd Product Specification 3.0 Optical Characteristics [VDD = 5,0V, Frame rate = 60Hz. Clock = 75,4MHz. IBL= 340mA. Ta =25 ±2 “C] ■ Measuring surrounding : dark room ■ Measuring spot size : field 2°

Shenzhen Yousee Technology Co., Ltd Product Specification Note (1) Definition of Vsat and Vth (at 20℃) Note (2) Definition of Viewing Angle : Note (3) Definition of Contrast Ratio(CR) : measured at the center point of panel Luminance with all pixels white CR = Luminance with all pixels black Note (4) Definition of Response Time : Sum of TR and TF

Shenzhen Yousee Technology Co., Ltd Product Specification Note (5) Definition of optical measurement setup Note (6) Definition of brightness uniformity Note (7) Rubbing Direction (The different Rubbing Direction will cause the different optima view direction. 4 Block Diagram 4.1 TFT-LCD Module

Shenzhen Yousee Technology Co., Ltd Product Specification 5. Interface Pin Connection • CNll Open Cell Side Connector : UJU IS100-300-C23 or Equivalent User Side Connector : JAE FI-X30H or Equivalent

Shenzhen Yousee Technology Co., Ltd Product Specification < Table 3. Electrical specifications > Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for VDD=5.0V, Frame rate=60Hz and Clock frequency = 75.4MHz. Test Pattern of power supply current 2. Duration of rush current is about 2 ms and rising time of VDD is 520 ps ± 20 %

Shenzhen Yousee Technology Co., Ltd Product Specification

Shenzhen Yousee Technology Co., Ltd Product Specification 8.0 Signal Timing Specifications8.1 The WG18519894817BA is operated by the DE only Item <Table 4. LVDS Rx Interface Timing Specification>

Shenzhen Yousee Technology Co., Ltd Product Specification 8.3 Signal Timing waveforms of interface signal 8.3.1 sync Timing Waveforms 8.3.3 Horizontal Timing Waveforms Thd

Shenzhen Yousee Technology Co., Ltd Product Specification 8.4 Input Signal,Basic,Display colors&Gray Scale of color Color & Gray Scale

Shenzhen Yousee Technology Co., Ltd Product Specification Power Sequence

Shenzhen Yousee Technology Co., Ltd Product Specification

1.Unit:mm 2.Do not scale drawing. 3. n Modification rev.number. 4.Genral Tolerance:±0.2 5. "*" For important dimension;( ) for reference dimention 6. RoHs must be complied.(Use Lead-free process) 深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOGY CO., LTD.

Product Specification Shenzhen Yousee Technology Co., Ltd This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2.1 Please use the mounting hole on the module side in installing and do not bending or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. 10.2.2 Please design display housing in accordance with the following guide lines. 10.2.2.1 Housing case must be destined carefully so...

Product Specification Shenzhen Yousee Technology Co., Ltd 10.5 Absolute Maximum Ratings and Power Protection Circuit 10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It’s recommended employing protection circuit for power supply. 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil...