深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) YX16901A Customer : (客 户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核 备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查 电 子 结 构 深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected] Adress:深圳

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX16901A YX-RD-001-A Version: First Edition Page 2 of 20

Shenzhen Yousee Technology Co., Ltd Product Specification CONTENTS 目录 1.GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 基本描述 2 .MODULE OUTLINE DRAWIN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5 产品外形图 3.INTERFACE DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6 接口定义 4.ABSOLUTE MAXIMUM RATINGS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 极限参数 (IC) 5.ELECTRICAL CHARACTERISTICS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 模块电气特性 6.BACKLIGHT...

Shenzhen Yousee Technology Co., Ltd Product Specification 1. GENERAL INFORMATION 基本描述 Contents 内容 a-si TFT, Positive Transmissive type Number of Dots 点阵 Outline dimensions 外形尺寸 Active area 有效区域 Pixel pitch 像素 Module size 模组尺寸 Viewing direction 视角方向 Backlight type 背光类型 LCD Driver IC LCD 驱动 IC Interface type 接口类型 LCM Input voltage 模组输入电压 Version: First Edition

Shenzhen Yousee Technology Co., Ltd_Product Specification Technical Parameters: 1) LCD Display Mode: 1.69” TFT transmissive 2) Viewing Angle: IPS (All Lock) 3) Display Colors: 262K Colors 6) Operating Temp: -20°C to 70°C Storage Temp: -30°C to 80°C 8) Materials and processes comply with RoHS. LEDA o--[>|--o LEDK (CIRCUIT DIAGRAM) BL pad height 0.4 MAX, please implement a clearance design. TITLE: ASSEMBLY

P/N: YX16901A YX-RD-001-A Version: First Edition Page 6 of 20

Shenzhen Yousee Technology Co., Ltd Product Specification 4. ABSOLUTE MAXIMUM RATINGS P/N: YX16901A YX-RD-001-A Version: First Edition Page 7 of 20

Shenzhen Yousee Technology Co., Ltd Product Specification 6. BACKLIGHT CHARACTERISTICS 背光电气特性 Item 项目 Forward voltage 正向电压 Connection mode 连接类型 7. OPTICAL CHAYACTERISTICS 光学特性 Item Response time 响应时间 Contrast ratio Color gamut Chromaticity 色度坐标 Note1.Response time is the time required for the display to transition from White to black(Rise Time,Tr)and from black to white(Decay Time,Tf).For a

Shenzhen Yousee Technology Co., Ltd Product Specification FIG1. The definition of Response time 响应时间定义 Note2.contrast Ratio(CR) is defined mathematically by the following formula ,For more information see FIG2. Contrast Ratio(CR)=Average Surface Luminance with all white pixels/ Average Surface Luminance with all black pixels 备注 2.对比度是由以下公式计算所得。详见 FIG2. 对比度=显示白色画面时平均表面亮度（P1，P2,……)/显示黑色画面时平均表面亮度（P1，P2,……) FIG2. Measuring method for Contrast ratio,surface luminance,Luminance uniformity,CIE(X,Y) chromaticity. 对比度，表面亮度，均匀度，CIE 坐标测试方法 Note4.Viewing angle is the angel at which contrast ratio is greater...

Shenzhen Yousee Technology Co., Ltd Product Specification 备注 4.视角指对比度大于等于一个特定值时的可视范围，对 TFT 屏，对比对特定值为 10，对黑白屏 CSTN 屏，对比度特定值为 2，视角由横轴（X 轴），竖轴（Y 轴）同 Z 轴（垂直与 LCD 表面）之间的夹 角来定义，详见 FIG3.。 FIG3 The definition of viewing angle 视角定义 Note6.CIE(X,Y)chromaticity is the Center point value.For more information see FIG2. 备注 6.选择中心点，分别测试 X，Y 值，详见 FIG2.。 Note7.For Viewing angle and response time testing,the testing date is base on AutronicMelchers's ConScope.Series instruments.For contrast ratio,Surface Luminance,Luminance uniformity and CIE,the testing date is base on CS-2000(BM-7/CA310) photo detector. 备注 7.视角和响应时间，测试...

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX16901A YX-RD-001-A Version: First Edition Page 11 of 20

Shenzhen Yousee Technology Co., Ltd Product Specification 8.2 Power on/off sequence with 3- power NOTE: This section is only for reference,Details please refer to the IC specification. P/N: YX16901A Version: First Edition YX-RD-001-A Page 12 of 20

Shenzhen Yousee Technology Co., Ltd Product Specification 9. RESET INPUT TIMING Table 47: Reset Timing 3. During the Resetting period, the display will be blanked (The display enters (he blanking sequence, which maximum time is 120 ms. when Reset Starts in the Sleep Out mode. The dispby remains the blank state in the Sleep In mode.) and then return to Default condition for Hardware Reset. 4. Spike Rejection can also be applied during a valid reset pulse, as shown below: NOTE: This section is only for reference,Details please refer to the IC specification. 10. Production process control P/N: YX16901A...

Shenzhen Yousee Technology Co., Ltd Product Specification WORKFLOW CHART Flow Chart Related Files Form used Production arrangements Process Inspection Production department or Quality department Production department or Quality department Production department or storage {Production planning and control documents)) {Standard operation procedure » {standard inspection procedure » {Corrective and Preventive control procedure » {Finished goods inspection procedure» {g,m {Nonconforming Product Control Procedure » {Reprocessing management » {Material handling management» First article Notices for...

Shenzhen Yousee Technology Co., Ltd Product Specification Version: First Edition

Shenzhen Yousee Technology Co., Ltd Product Specification Note;The rest of the test items according to our standards 注：其余测试项按我司标准执行 12. RELIABILITY TEST CONDITIONS 可靠性测试条件 NO. Test Item Test Condition 序号 实验项目 Inspection after test High Temperature Storage 高温存储测试

Shenzhen Yousee Technology Co., Ltd Low Temperature Product Specification 检查，样品不允许有以下 1.Air bubble in the LCD;模 块中有气泡 Temperature Cycle Damp Proof Test 防潮测试 6.Current IDD is twice higher than initial value. 电流 IDD 大于初始值的 两倍。 测试前对样品进行外观和功能测试， 采用空气放电，对 TP 进行单次放 电，9 个点每一点放电一次，每次间 检查，如果合格就进行下一循环测 试，如果不合格，试验停止，并进行 问题判定 13. PRECAUTIONS FOR USING LCD MODULES 模组使用注意事项 1. Handing precautions 使用注意事项 1.1 The display panel is made of glass and polarizer.As glass is fragile.It tends to become or chipped during handing especially on the edges.Please avoid dropping or jarring.Do not subject it to a mechanical...