深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD

Shenzhen Yousee Technology Co., Ltd Product Specification Document Revision History General Description Absolute Maximum Ratings Optical Characteristics Block Diagram Electrical Characteristics Reliability Test Items Outline Dimension Packing Form General Precaution

Shenzhen Yousee Technology Co., Ltd Product Specification Document Revision History Change No.

Product Specification Y X07025322116BB is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel and a driving circuit.This TFT LCD has a 7.0 (16:9) inch diagonally measured active display area with (1024 horizontal by600 vertical pixel) resolution. 7 (16:9 diagonal) inch configuration Compatible with NTSC & PAL system Image Reversion: UP/DOWN and LEFT/RIGHT ROHS design

Product Specification 2.0 Absolute Maximum Ratings2.1 Environment Absolute Rating Item Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (3) Test condition: LED Current 140mA

Shenzhen Yousee Technology Co., Ltd Product Specification 3.0 Optical Characteristics3.1 Optical specification Ta = 25°C, VCQ3.3V 3.2 Measuring Condition ■ Measuring surrounding : dark room ■ Measuring spot size : field 2°

Shenzhen Yousee Technology Co., Ltd Product Specification Note (1) Definition of Vsat and Vth (at 20℃) Note (2) Definition of Viewing Angle : Note (3) Definition of Contrast Ratio(CR) : measured at the center point of panel Luminance with all pixels white CR = Luminance with all pixels black Note (4) Definition of Response Time : Sum of TR and TF

Shenzhen Yousee Technology Co., Ltd Product Specification Note (5) Definition of optical measurement setup Note (6) Definition of brightness uniformity 2/6 Note (7) Rubbing Direction (The different Rubbing Direction will cause the different optima view direction. 4.0 Block Diagram 4.1 TFT-LCD Module

Shenzhen Yousee Technology Co., Ltd Product Specification

Product Specification Note (1): The brightness of LCD panel could be changed by adjusting the AC component of VCOM. MIPI command

Shenzhen Yousee Technology Co., Ltd Product Specification 6.2 TFT-LCD Current Consum ITEM Notel: Typ. specification : Gray-level test Pattern Max. specification : Black test Pattern

Shenzhen Yousee Technology Co., Ltd Product Specification 6.3 Timing Diagram of Interface Signal Equivalent vertical input timing format Equivalent horizontal input timing fo

Shenzhen Yousee Technology Co., Ltd Product Specification

Product Specification 7.0 Reliability test items NO Note: All tests above are practiced at module type. There is no display function NG issue occurred, All the cosmetic specification is judged before the reliability stress.

1.Unit:mm 2.Do not scale drawing. 3. n Modification rev.number. 4.Genral Tolerance:±0.2 5."*" For important dimension;( ) for reference dimention 6. RoHs must be complied.(Use Lead-free process) ITEM TYPE 类 型 MODEL NO. 模 组 号 PART NO. 料 号 Luminous (Without PET) Chromaticity Coordinatses Without PET Uniformity Backlight voltage Backlight current

Shenzhen Yousee Technology Co., Ltd Product Specification 9.0 Packing form 9.1 Packing form 1

Product Specification This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2.1 Please use the mounting hole on the module side in installing and do not bending or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. 10.2.2 Please design display housing in accordance with the following guide lines. 10.2.2.1 Housing case must be destined carefully so as not to put stresses on LCD all...

Shenzhen Yousee Technology Co., Ltd Product Specification 10.5 Absolute Maximum Ratings and Power Protection Circuit 10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It’s recommended employing protection circuit for power supply. 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil...