深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) YX07022362784SB Customer : (客 户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核 备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查 电 子 结 构 深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected]

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX07022362784SB Version: First Edition YX-RD-001-A Page 2

Product Specification Shenzhen Yousee Technology Co., Ltd

Shenzhen Yousee Technology Co., Ltd Product Specification Document Revision History Change No.

Product Specification Shenzhen Yousee Technology Co., Ltd WEIYAO Display model Y X07022362784SB is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel and a driving circuit.This TFT LCD has a 7.0 (16:9) inch diagonally measured active display area with (1024 horizontal by600 vertical pixel) resolution. 7 (16:9 diagonal) inch configuration Compatible with NTSC & PAL system Image Reversion: UP/DOWN and LEFT/RIGHT ROHS design

Product Specification 2.0 Absolute Maximum Ratings2.1 Electrical Absolute Rating 2.1.1 TFT LCD Module Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (3) Test condition: LED Current 180mA

Shenzhen Yousee Technology Co., Ltd Product Specification 3.0 Optical Characteristics3.1 Optical specification Item ■ Measuring surrounding : dark room

Shenzhen Yousee Technology Co., Ltd Product Specification Note (1) Definition of Vsat and Vth (at 20℃) Note (2) Definition of Viewing Angle : Note 3: Definition of response time: The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10%

Shenzhen Yousee Technology Co., Ltd Product Specification Note 4: Definition of contrast ratio: Contrast ratio is caJcuiated by the following formula. Brightness on the "black" state Note 5: Definition of color chromaticity (CIE 1931) Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel

Shenzhen Yousee Technology Co., Ltd Product Specification

Shenzhen Yousee Technology Co., Ltd Product Specification 6. Electrical Characteristics6.1 TFT LCD Module Item Note (1): The brightness of LCD panel could be changed by adjusting the AC component of VCOM. Note (2): STHL, STHR, OEH, L/R, CPH1~CPH3, STVD, STVU, OEV, CKV, U/D Notel: Typ. specification : Gray-level test Pattern Max. specification : Black test Pattern

Shenzhen Yousee Technology Co., Ltd 6.3 Timing Diagram of Interface Signal Product Specification

Shenzhen Yousee Technology Co., Ltd Product Specification 132 LK cycle tire DCLK frequency rcLK pulse duty VSD setup time ^D held time HSD setup time hold time l^tasetup ti me teta hold time DE setup tin, e DE hold time h-brizo n tal disp ay a rea ^D pehod time ^D pulse width ^D back porch HSD front porch \lertical display area VSD poriod time VSD pulse width vsD back porch \^D front porch

Shenzhen Yousee Technology Co., Ltd Product Specification fewer On Sequence: VCC->AVDD ->VGL->VGH -> Data-> G.'L fewer Off Sequence: G.’L-> Data ->VGH VGL AVDD -> VCC Notes: Data include R2-R7, GGH37. BCKB7f USD. VSD. DCLK. £HLR. UPDN. DE MODE, RSTG, STGYG. SHLR, UPDN. DlTH

Shenzhen Yousee Technology Co., Ltd Product Specification 7.0 Reliability test items NO

Product Specification Shenzhen Yousee Technology Co., Ltd TYPE 类 型 MODEL NO. 模 组 号 PART NO. 料 号

Shenzhen Yousee Technology Co., Ltd Product Specification 9.0 Packing form 9.1 Packing form 1

Shenzhen Yousee Technology Co., Ltd Product Specification 10.0 General Precaution10.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2.1 Please use the mounting hole on the module side in installing and do not bending or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. 10.2.2 Please design display housing in accordance with the following guide lines. 10.2.2.1...

Shenzhen Yousee Technology Co., Ltd Product Specification 10.5 Absolute Maximum Ratings and Power Protection Circuit 10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It’s recommended employing protection circuit for power supply. 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil...