深圳市宇锡科技有限公司 SHENZHEN YOUSEE TECHNOLOG CO., LTD DISPLAY SPECIFICATION Product NO: (产品型号) YX07016432484SB Customer : (客 户) APPROVED BY CUSTOMER 客户签署栏 Approved by Remark 审核 备注 APPROVED BY YOUSEE 宇锡签署栏 Checked by 检查 电 子 结 构 深圳市宇锡科技有限公司 Shenzhen Yousee Technology Co.,Ltd 邹长城 LONG Tel:15818552076 E-mail: [email protected]

Shenzhen Yousee Technology Co., Ltd Product Specification P/N: YX07016432484SB Version: First Edition YX-RD-001-A Page 2 of 18

Shenzhen Yousee Technology Co., Ltd Product Specification Document Revision History General Description Absolute Maximum Ratings Optical Characteristics Block Diagram Electrical Characteristics Reliability Test Items Outline Dimension Packing Form General Precaution

Product Specification Shenzhen Yousee Technology Co., Ltd YOUSEE Display model YX07016432484SB is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel and a driving circuit.This TFT LCD has a 7.0 (16:9) inch diagonally measured active display area with (1024 horizontal by600 vertical pixe l) resolution. 7 (16:9 diagonal) inch configuration Compatible with NTSC & PAL system Image Reversion: UP/DOWN and LEFT/RIGHT ROHS design

Product Specification 2.0 Absolute Maximum Ratings2.1 Electrical Absolute Rating 2.1.1 TFT LCD Module Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (3) Test condition: LED Current 160mA

Shenzhen Yousee Technology Co., Ltd Product Specification 3.0 Optical Characteristics3.1 Optical specification Item ■ Measuring surrounding : dark room ■ Measuring spot size : field 2°

Shenzhen Yousee Technology Co., Ltd Product Specification Note (1) Definition of Vsat and Vth (at 20℃) Note (2) Definition of Viewing Angle : Note 3: Definition of response time: The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%.

Product Specification Note 4: Definition of contrast ratio: Contrast ratio is calculated by the following formula. Brightness on the "white” state Brightness on the "black” state Note 5: Definition of color chromaticity (CIE 1931) Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel

Shenzhen Yousee Technology Co., Ltd Product Specification

Shenzhen Yousee Technology Co., Ltd Product Specification 6. Electrical Characteristics6.1 TFT LCD Module Item Note (1): The brightness of LCD panel could be changed by adjusting the AC component of VCOM. Note (2): STHL, STHR, OEH, L/R, CPH1~CPH3, STVD, STVU, OEV, CKV, U/D Notel: Typ. specification : Gray-level test Pattern

Shenzhen Yousee Technology Co., Ltd Product Specification 6.3 Timing Diagram of Interface Signal

Shenzhen Yousee Technology Co., Ltd Product Specification Item

Shenzhen Yousee Technology Co., Ltd Product Specification 6.4 Power Sequence PofJW Vi V .i il Pa-,ve: Or: Sea^erse: vCC->AVDD VGl-> vGl I -> Data -> B _ Pa^er Off £aa_.ei'ae: G.i_->Data ->VGll uGL ->AvDD ->VCC Nates: Data rduds R"H-!7. GI>G7. K>G7. HED. VSD, DCLK. £HLR. UPDN. DE. MODE. RSTG, STBYG. SHLR. UPDN. DlTH

Shenzhen Yousee Technology Co., Ltd Product Specification 7.0 Reliability test items Test Notel: Criteria: Normal display image with no obvious non-uniformity and no line defect. Note2: All tests above are practiced at module type. Note3: All the cosmetic specification is judged before the reliability stress. Only a single item of these tests shall be executed on a single panel, not more than one test item shall be executed on a single panel Note4: Evaluation should be tested after storage at room temperature for two hours.

Shenzhen Yousee Technology Co., Ltd Product Specification

Shenzhen Yousee Technology Co., Ltd Product Specification 9.0 Packing form 9.1 Packing form 1

Product Specification This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2.1 Please use the mounting hole on the module side in installing and do not bending or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. 10.2.2 Please design display housing in accordance with the following guide lines. 10.2.2.1 Housing case must be destined carefully so as not to put stresses on LCD all...

Shenzhen Yousee Technology Co., Ltd Product Specification 10.5 Absolute Maximum Ratings and Power Protection Circuit 10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It’s recommended employing protection circuit for power supply. 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil...