1. SCOPE This specification shall cover the characteristics of the ceramic resonator with 455KHz 4. ELECTRICAL SPECIFICATION 4.1 Oscillation Frequency (Fosc) 4.2 Resonant Impedance(Ro) 4.3 Capacitance (Co) 4.4 Temperature Characteristics of Oscillation Frequency 4.5 Rated Voltage 4.6 Maximum Input Voltage 4.7 Insulation Resistance 5. Environmental Specification : 5.1 Lead Pull 5.2 Vibration 5.3 Shock 5.4 Solderability : 1KG load Terminal Direction Min. 600-3300rpm.1.5mm.x.y & .z axes.lH Each Min. Random Drop,3 0cm High Concrete Floor Dipping Terminals Into Molten Solder at 230±5C At 5±0.5 Sec. 5.5 Resistance to Soldering Heat 5.6 Heat Resistance 5.7 Operation Tempeature 5.8 Storage Temperature 5.9 Aging Rate Dipping Lead Terminals No Close Than 2mm From the Sn 350 ± 10°C 3 Sec. After 1H to Test. Keep In 40±2C Temp 90%Humidity For 100H After 1H To Test. : -20Cto+80C : -40Cto+85C :Fosc ±0.5%max. SHENZHEN YANGXING TECHNOLOGY CO., LTD

SHENZHEN YANGXING TECHNOLOGY CO., LTD