1. Catalogs
  2. Shenzhen Wlink Technology Co., LTD
  3. WL-D83 Series NB-IoT/CAT-M1 Modem

WL-D83 Series NB-IoT/CAT-M1 Modem

WL-D83 Series NB-IoT/CAT-M1 Modem

WL-D83 Series NB-IoT/CAT-M1 Modem

Product catalog summary
Introduction
The WL-D83 NB-IoT/CAT-M1 Modem is designed for IoT/M2M applications, offering a rugged design, low power consumption, and wide coverage. It supports NB-IoT and CAT-M1 networks, focusing on indoor coverage, low cost, long battery life, and high connection density. The modem is suitable for industrial automation and monitoring applications such as smart water, oil, gas, power, and lighting control.

Basic Features
  • Integrated NB-IoT/CAT-M1 communication
  • Standard PPP, UDP, and CoAP protocols
  • RS232/RS485 interfaces for data communication
  • Optimized EMC design
  • Support for APN and VPDN private networks
  • Transparent data transmission
  • Dynamic IP address support for data service centers
  • LED status indication
  • Wide voltage input range and smart power management
  • External power on/off control

Enhanced Features
  • Multiple operation modes: always online, offline when idle, and online/offline control via user commands
  • Flexible data communications with support for UDP and CoAP
  • Customizable data frame separators, reconnecting intervals, and heart-beat data frames

Specifications
  • Network: NB-IoT, CAT-M1, GPRS
  • Protocols: PPP, UDP, CoAP, ICMP
  • Gain: 1.4dBi@900MHz, 3dBi@1800MHz
  • RF impedance: 50Ω
  • Dimensions: 70.5mm x 55.5mm x 22mm
  • Weight: 111g
  • Operating temperature: -30 to +75℃
  • Storage temperature: -40 to +85℃
  • Humidity: 0-95% non-condensing
  • Guarantee: One year

Interface and Power
  • Cellular Antenna: SMA-K (Female)
  • Standard Micro SIM/R UIM interface
  • DB9 connector
  • GPS Antenna: SMA-K (Female) (optional)
  • Voltage: DC +5 ~ 32V (standard 12V/1A power adapter)
  • SIM/R-UIM Card: 1.8/3V
  • Power Consumption: Transfer mode: 30mA/12V (Average), Idle: 7mA/12V (GPS off)

Device Management
  • 1x RS232, RXD, TXD, GND
  • 1x RS485, A, B
  • Baud Rate: 300–115200bps
  • Support for parameter configuration and firmware upgrade via WLINK M2M Platform
  • Remote parameters configuration by SMS

Ordering Information
  • WL-D83-N2: NB-IoT B1/3/5/8/20/28, RS232 port
  • WL-D83-N4: NB-IoT B1/3/5/8/20/28, RS485 port
  • WL-D83-NC2: NB-IoT/CAT-M1 B1/2/3/4/5/8/12/13/17/18/19/20/25/26/28/39 (B39 CAT-M1 only), RS232 port
  • WL-D83-NC4: NB-IoT/CAT-M1 B1/2/3/4/5/8/12/13/17/18/19/20/25/26/28/39 (B39 CAT-M1 only), RS485 port

Package Contents
  • D83 Unit
  • 1x 12VDC Power Supply Adaptor
  • 1x RS-232 connection Cable
  • 1x LTE antenna
See more

Catalog excerpts

WL-D83 Series NB-IoT/CAT-M1 Modem-1

> NB-loT/CAT-Ml(eMTC) network optional > Wide Coverage Area > Numerous and Powerful Nodes Connections > Flexible and practical data communications > Friendly configuration tool > WUNK Modem Management Platform > Wide operating temperature range: -30 to 75°C Narrow Band-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT uses a subset of the LTE standard, but limits the bandwidth to a single narrow-band of 200kHz. NB-IoT focuses specifically on indoor coverage, low cost, long battery life, and high connection density, significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases. WLINK rugged D83 serial port to IP modem is a NB-IoT/CAT-M1(eMTC) modem have been developed especially for IoT/M2M application. It provides RS232/RS-485 interface and equipped with PPP, UDP and CoAP protocol, it could convert the user data into LTE NB-IoT/CAT-M1 network and transmits the data to the customer's data service center through complete transparent data channel, allows a simple and rapid integration of cellular network connectivity into IoT/M2M application. D83 series modem is a unique compact hardware and low power consumption designs, making it an ideal solution for a variety of industrial automation and monitoring applications including smart water/oil/gas, Power, Environment Protection, Water Conservancy and Lighting control monitoring etc. • Integrated NB-IoT/CAT-M1(eMTC ) • Standard PPP, UDP and Coap protocol communication • RS232/RS485 optional for data communication Web: www.wlink-tech.com Add: 318-319 Yiben building, Chaguang Road, Nanshan District, Shenzen, China Tel: 86-755-86089513 Email: [email protected] Shenzhen Wlink Technology Co., Limited

 Open the catalog to page 1
WL-D83 Series NB-IoT/CAT-M1 Modem-2

H | 9 I Shenzhen W'link Technology Co., LTD • Support APN and VPDN private network • Support transparent data transmission • Support data service center with dynamic IP address • Support LED status indication• Wide range voltage input • Smart power management • External power on/off control • Reliable, flexible and easy to deploy Multiple operation modes Flexible and utilitarian data communications Parameters configuration and remote management Specification Always online, automatically connect to NB-IoT/CAT M when powered on Off-line when idle, online mode will be triggered by user data/ring...

 Open the catalog to page 2
WL-D83 Series NB-IoT/CAT-M1 Modem-3

Typical Diagram Package Contents: D83 Unit 1x 12VDC Power Supply Adaptor 1x RS-232 connection Cable 1x LTE antenna Web: www.wlink-tech.com Add: 318-319 Yiben building, Chaguang Road, Nanshan District, Shenzen, China Tel: 86-755-86089513 Email: [email protected] Shenzhen Wlink Technology Co., Limited

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.